Demon will not boot Xbox

[TheGlichter]

Hello People,

I have a problem with a demon installed in a Corona v3. The console doesn't turn on when it is switched to the demon, it only beeps when pressing the power button but it seems not to load the freeboot.
Switching to the Xbox nand is no problem, that works just fine. Also when i flash the stock nand to the Demon and disable the CR it boots right away.
The demon itselfs behaves normally connected to J-Runner, i can read and write whatever i like with no errors. Also succesfully reflashed the 1.04 FW with JR a couple of times but no succes.
Its definately not the soldering, both nands are working and can be read and written to..also checked the data ports with a multimeter
My quess is that the problem lies in the Demon firmware, i would like to downgrade it to 1.02 but cant find the 1.02.

Things i tried:

Flashing the xbox nand with the freeboot through the Demon: Works
Flashing the xbox nand with stock nand: Works
Flashing the Demon with the stock nand: Works
Flashing the Demon with the freeboot: Xbox wont turn on
Updated the Demon -> 1.04 Firmware through recovery mode and normal mode with JR: Works

Any ideas??



===================================================
vrijdag 21 juni 2013 11:09:01


J-Runner v0.2 Beta (289) Started






Checking Files
Finished Checking Files
Downloaded *xeBuild/16202/_glitch2.ini
Finished Checking Files
Programming Coolrunner
C:\Program Files (x86)\J-Runner v02 Beta (288) Core Pack\common\xsvf\corona.5_2_en.xsvf
sending xsvf to demon...
Done




Current: DemoN
Switching to XBOX
Success
Current: DemoN
Switching to XBOX
Success
Current: DemoN
Switching to XBOX
Success




Reading Nand to C:\Program Files (x86)\J-Runner v02 Beta (288) Core Pack\output\nanddump1.bin
XBOX360
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Reading Nand
Done!
in 0:23 min:sec


Initializing nanddump1.bin..
Nand Initialization Finished
Using Xell with HDMI support
Load Files Initiliazation Finished
16203
Started Creation of the 16203 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.07.561
---------------------------------------------------------------
building glitch2 image
---------------------------------------------------------------
C:\Program Files (x86)\J-Runner v02 Beta (288) Core Pack\002952322509\nandflash.bin image built, info:
---------------------------------------------------------------
Console : Corona
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 002952322509
ConsoleId : 532726199093
MoboSerial: 9909961111942249
Mfg Date : 06/19/2012
CPU Key : 0C964B7ABFF51300D698B95E85959B31
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 24826F1EEEB754DEDB222E0B39039E1E
CF LDV : 2
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Program Files (x86)\J-Runner v02 Beta (288) Core Pack\002952322509
Image is Ready
DEMON
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:28 min:sec

 

[DreamZ]

any chance of some pictures of your install as the Template states?

have you tried flashing stock to your demo nand checking if it boots?

 

[BL4K3Y]

Images of your install are mandatory.

Post your J-Runner log as well please.

 

[TheGlichter]

any chance of some pictures of your install as the Template states?

have you tried flashing stock to your demo nand checking if it boots?

Yes, stock nand boots fine when flashed to demon as described. Just will not boot a freeboot

 

[TheGlichter]

Images of your install are mandatory.

Post your J-Runner log as well please.

n

Thanks for looking into it, i will post some pictures and logs the first thing in the morning..have been breaking my head with this thing for some time now. Tomorrow a fresh start again

 

[Steel City Mods]

Willing to bet its the cr_en, and the stock nand is actually booting from the retail and not the demon. Could be wrong though, but its an issue ive seen plenty of times. Post pics..

 

[TheGlichter]

Willing to bet its the cr_en, and the stock nand is actually booting from the retail and not the demon. Could be wrong though, but its an issue ive seen plenty of times. Post pics..

I have also flashed a couple of CR_EN files but I dont think the coolrunner has anything to do with it and it does disable and boots the stock side when switched to the stock nand.
And yes also written the stock nand to the demon and then both sides boot fine with the CR disabled

I noticed as you can see in JR that i have to toggle the nand a couple of times before it actually switches to the other side. Also when i read the Xbox nand through the demon it automatically switches to the Demon nand when its done..maybe thats a bug in JR???...has seen that a few times before installing other demons

 

[TheGlichter]

Problem solved, fitted another demon in and worked instantly. Still dont know if it was a fw issue or a hardware issue..would have been nice if someone has a link to 1.02?? Well thnks 4 the wonderfull support