So a quick general question guys since this is both my first demon and cr3 pro install. I just read the nand via the demon and wrote the ecc* on the demon itself. My question is do I just get plug it in now to get the cpu key and then write the image? The reason I ask is because I know you're supposed to "flash" the coolrunner and tick the demon installed box but since I know you're not supposed to write timing files to the CR3 Pro do I just skip that step comepletely? I just want to be sure thanks guys.
ANSWERED Demon with Cr3 Pro
- Thread starter ChoCho346
- Start date
DreamZ
VIP Member
Read the guides again plz....
You do not! Flash the cr3pro. Its in the guide.
Do not continue with what you are doing untill you understand the process
Write ecc to demon and follow cr3pro guides to get the console to boot
You do not! Flash the cr3pro. Its in the guide.
Do not continue with what you are doing untill you understand the process
Write ecc to demon and follow cr3pro guides to get the console to boot
I know you don't bud all I am asking is now that ecc* is written and since I am not supposed to write any files do I just get my cpu key now? Reason I ask is because I know you have to checkmark the demon installed box when you flash other coolrunners?
DreamZ
VIP Member
DreamZ
VIP Member
What console? Corona? Trinity? Have you read up on this prior to install?
Just seems to me like your just following pictures instead of reading the guides and understanding.
Without physically standing next to you and seeing the console I wouldnt have a clue why it isnt glitching.
You would need to fill this out
http://team-xecuter.com/forums/showthread.php?t=136946
Its glitching and its a corona v3 halo 4 console. I didn't know you need to do ip scanning or com monitor on coronas. Trying to understand how to do either of those but I'm having trouble understanding.
DreamZ
VIP Member
Ok and my router isn't by a tv so does it matter if the av isn't connected? Also just under cmd use ipconfig?
Last edited: