do you really have to desolder the LPC on a v1.0 xbox? some places say you do some say you dont so i was wondering.
desoldering the LPC
- Thread starter bunny-x-B18C5
- Start date
yeah, don't worry though
its pretty easy, just get some copper braid , to remove the solder
careful though if u wanna use a solder sucker as they can sum times cause damage if ur not careful
its pretty easy, just get some copper braid , to remove the solder
careful though if u wanna use a solder sucker as they can sum times cause damage if ur not careful
You don't have to but it's easier. I also have a 1.0 x-box, but all I did was put a little extra solder on the top of each hole, put the pin header on, and solder the extra on to the pins individually. I know I keep saying this but I still think it's the easiest setup for 1.0 x-box.
If you don't want to touch the LPC go for the wire setup. You don't need to desolder the LPC, but you are gonna want to solder something.
If you don't want to touch the LPC go for the wire setup. You don't need to desolder the LPC, but you are gonna want to solder something.
I just did my v1.0 box and had a second person help me.. If you use your soldering iron CAREFULLY and a solder sucker.... One person uses the iron on the one side and the other person uses the solder sucker and sucks it out the other side..Thats how I did it and it took me like 10 mins to do!!!!
Great way of flashing from laptop
Hello all,
I was delighted when i saw this item on ebay (http://cgi.ebay.ie/ws/eBayISAPI.dll?ViewItem&item=320475558682&_trksid=p2761.l1259) but after buying it and plugging it in and installing the drivers it wouldn’t work with jungle flasher. I expected this to happen so i tried to uninstall the drivers and do a manual install the portio32 drivers as per instructions with jungleflasher.
But my laptop wont accept the portio32 drivers as compatible with the device (see attached).
Has anyone experienced the same problem or has a solution, any help or pointing me to a site where i could get drivers that will work with jungleflasher would be great.
Thanks
Hello all,
I was delighted when i saw this item on ebay (http://cgi.ebay.ie/ws/eBayISAPI.dll?ViewItem&item=320475558682&_trksid=p2761.l1259) but after buying it and plugging it in and installing the drivers it wouldn’t work with jungle flasher. I expected this to happen so i tried to uninstall the drivers and do a manual install the portio32 drivers as per instructions with jungleflasher.
But my laptop wont accept the portio32 drivers as compatible with the device (see attached).
Has anyone experienced the same problem or has a solution, any help or pointing me to a site where i could get drivers that will work with jungleflasher would be great.
Thanks
Re: Great way of flashing from laptop
PortIO isnt a replacement for VIA Drivers, also with the latest version of JungleFlasher you don't actually need to install portio32 at all as it calls it on-the-fly.
Have a read through these:
The FirmWare Mod - http://www.megaupload.com/?d=8EU17Q0H (basic overview of what you are undertaking)
Setting Up Your VT6421 PCMCIA Card For Flashing - http://bit.ly/bNoZgu (essential for LiteOn's are the 'freeze')
JungleFlasher Tutorial - http://bit.ly/cDXYlX (JungleFlasher tutorial, obviously)
PortIO isnt a replacement for VIA Drivers, also with the latest version of JungleFlasher you don't actually need to install portio32 at all as it calls it on-the-fly.
Have a read through these:
The FirmWare Mod - http://www.megaupload.com/?d=8EU17Q0H (basic overview of what you are undertaking)
Setting Up Your VT6421 PCMCIA Card For Flashing - http://bit.ly/bNoZgu (essential for LiteOn's are the 'freeze')
JungleFlasher Tutorial - http://bit.ly/cDXYlX (JungleFlasher tutorial, obviously)
Re: Great way of flashing from laptop
you dont install the port io drivers in jf 1.70 as mentioned above but make sure you have configured your via card drivers etc before flashing liteons
oh and read jf tutorial and then read it again so you dont sh*t your self when it freezes lol
you dont install the port io drivers in jf 1.70 as mentioned above but make sure you have configured your via card drivers etc before flashing liteons
oh and read jf tutorial and then read it again so you dont sh*t your self when it freezes lol
Re: Great way of flashing from laptop
hi so when it ask me to add drivers i go to my desktop and add the VIA v5.30c Drivers ?Oggy said: