DG-16D4S manual "key" spoofing...FAILED

Status
Not open for further replies.
W

wizpanda

VIP Member
Aug 20, 2010
309
0
Trinidad
I dont have the original dump, but I have the keys in a .txt file, basically saved from reset glitch mod. Anyway jungleflasher allows me to insert the key manually in the spoof section, however it isnt copied according to the log file but the new key does show up in the "target box". As a result when I flash the pcb board it doesnt play originals or burns cause it seems to have the ffffffffffffffffffffffffff key still? Help Please...

I did try jungle 1.9, just tryied a older one to see if i get through...
 
Last edited:
W

wizpanda

VIP Member
Aug 20, 2010
309
0
Trinidad
Ok, well I have all security info from RGH hack...what can or should I do? I also have the original pcb with the codes below it.
 
Last edited:
T

Turdfurgeson82

VIP Member
Sep 12, 2010
313
33
Ohio
I did this for a friends slim that had a botched kamikaze attempt and was able to spoof the drive as liteon dg-16d4S 0272 instead 0255 with dash launch 2.26 installed it works and I had to use a program called lizard toolbox to make the bin file and flash it with jungleflasher.
 
Last edited:
  • Like
Reactions: masterdz and wizpanda
W

wizpanda

VIP Member
Aug 20, 2010
309
0
Trinidad
Turdfurgeson82 did it work after?...I trying the lizard software now...aint figure it out yet...I still surprised that with all the security info saved using RGH that I cant do something with it to resolve this situation...did you mean you spoofed a particular drive as a dg 16d2s?
 
Last edited:
T

Turdfurgeson82

VIP Member
Sep 12, 2010
313
33
Ohio
yes the drive I spoofed was a liteon 0225 DG-16D4S as a DG-16D4S 0272 it can be done I did it. I tried and tried and before I spoofed as the DG-16D4S 0272 it wouldnt play backups or originals but it plays both now. If you need help pm the key to me and I will try to help and make a bin file for you.
 
Last edited:
C

cog68

VIP Member
Apr 27, 2011
173
0
Also I know this goes without saying but if you do spoof it to a DG-16D26 then XBL is a big no go but since you are RGHing I suspect you won't anyway. Just a heads up.Cog
 
T

Turdfurgeson82

VIP Member
Sep 12, 2010
313
33
Ohio
I do not know what your talking about this is for spoofing a liteon DG-16D4S 0225 without OFW and only having the key from RGH. You can spoof it as a DG-16D4S 0272 and have dash launch 2.26 installed. If you need help pm with your key and I can build you a CFW
 
Ubergeek

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
Whats all this talk about RGH and the security info you get from it ?

RGH has NOTHING to do with firmware other then getting the DVD key

Do you guys actually read instructions before posting on forums asking for help ?
 
T

Turdfurgeson82

VIP Member
Sep 12, 2010
313
33
Ohio
What I was saying is getting the key from xell and using it to spoof a DG-16D4S 0225 as a 0272 because it cant spoof as 0225. This is good for people who dont have a OFW dump from their 0225 drives and this does work but You have to build the CFW with lizard toolbox and not jungleflasher but use jungleflasher to write the CFW to the drive. I never said anything about getting security info from RGH only the key.
 
M

masterdz

Noob Account
Nov 22, 2013
1
0
Turdfurgeson82 said:
I did this for a friends slim that had a botched kamikaze attempt and was able to spoof the drive as liteon dg-16d4S 0272 instead 0255 with dash launch 2.26 installed it works and I had to use a program called lizard toolbox to make the bin file and flash it with jungleflasher.
Click to expand...
Hello sir

I have the same problem here

http://team-xecuter.com/forums/showthread.php?t=78058

DG-16D4S 0225

and I need to spoof a firmware to flash my XBOX 360 Drive

I have the LiteOn

I have only the key.bin

https://www.mediafire.com/?6g46ghg34dhggh9

Thank you so much sir
 
Status
Not open for further replies.