DGX problem, maybe fault?

G

goldmoon

Junior Member
Dec 5, 2011
23
0
Hi

Firstly, soory for my bad english.
I suck with the DGX 1 week. I tried 2 trinity and 2 corona(V1 and v4) many many wires length and types, but only glitching and no boot to Xell. If i use short 8-12cm cable for the CPU rst the glich is strange. long tile(5-8sec) light the green for two times and the glitch is stoped. When i Use 20cm for CPU rst the glitching is good but no boot into xell.
Anybody can help me please?
 
G

goldmoon

Junior Member
Dec 5, 2011
23
0
Firstly i soldered it to the pads many thomes, but no result...I don't want to broke the pads ..that is the reason why I solder that pins to the pads
 
G

goldmoon

Junior Member
Dec 5, 2011
23
0
2013. január 31. 16:00:23

J-Runner v0.2 Beta (285) Started


It's advised to run in administrator mode on Windows 8
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files

===================================================
2013. január 31. 16:00:34

J-Runner v0.2 Beta (285) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
A távoli kiszolgáló a következő hibát küldte vissza: (404) Nem található.
Finished Checking Files
Downloading...

===================================================
2013. január 31. 16:01:34

J-Runner v0.2 Beta (286) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
A távoli kiszolgáló a következő hibát küldte vissza: (404) Nem található.
Finished Checking Files
Checking Console..
Version: 03
Flash Config: 0x00043000
CB Version: 13181
Corona
Reading Nand to E:\Xbox\J-Runner\output\nanddump1.bin
Reading Nand
Done!
in 2:09 min:sec

Reading Nand to E:\Xbox\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Nand Initialization Finished
Reading Nand
Done!
in 2:08 min:sec

Comparing...
Nands are the same
Checking Console..
Version: 03
Flash Config: 0x00043000
CB Version: 13181
Corona
Version: 03
Flash Config: 0x00043000
Writing Nand
CORONA_16MB_DGX.ecc
Done!
in 0:10 min:sec

Checking Console..
Version: 03
Flash Config: 0x00043000
CB Version: 13121
Corona
Version: 03
Flash Config: 0x00043000
Writing Nand
CORONA_16MB_DGXv2.ecc
Done!
in 0:10 min:sec

Tip: Load the nand on source to have quicker results.
Scanning....
No Xbox Detected
Finished
Connection TimeOut
Connection TimeOut
Connection TimeOut
Tip: Load the nand on source to have quicker results.
Scanning....
No Xbox Detected
Finished
Connection TimeOut
Tip: Load the nand on source to have quicker results.
Scanning....
No Xbox Detected
Finished
Checking Console..
Version: 03
Flash Config: 0x00043000
CB Version: 13121
Corona
Version: 03
Flash Config: 0x00043000
Writing Nand
nanddump1.bin
Done!
in 2:08 min:sec

Checking Console..
Version: 03
Flash Config: 0x00043000
CB Version: 13181
Corona
Version: 03
Flash Config: 0x00043000
CB Version: 13181
Corona
Reading Nand to E:\Xbox\J-Runner\output\nanddump1.bin
Reading Nand
Done!
in 2:08 min:sec

Reading Nand to E:\Xbox\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Reading Nand
Nand Initialization Finished
Done!
in 2:08 min:sec

Comparing...
Nands are the same
Version: 03
Flash Config: 0x00043000
Writing Nand
CORONA_16MB_DGX.ecc
Done!
in 0:10 min:sec

Tip: Load the nand on source to have quicker results.
Scanning....
No Xbox Detected
Finished
Tip: Load the nand on source to have quicker results.
Scanning....
No Xbox Detected
Finished
Checking Console..
Version: 03
Flash Config: 0x00043000
CB Version: 13121
Corona
Version: 03
Flash Config: 0x00043000
Writing Nand
CORONA_16MB_DGXv2.ecc
Done!
in 0:10 min:sec

Tip: Load the nand on source to have quicker results.
Scanning....
No Xbox Detected
Finished
Tip: Load the nand on source to have quicker results.
Scanning....
No Xbox Detected
Finished
Connection TimeOut
Connection TimeOut
Connection TimeOut
 
G

goldmoon

Junior Member
Dec 5, 2011
23
0
No, the light not stopped, but i try the alternate and orig. xell il Jrunner....no luck
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
goldmoon said:
No, the light not stopped, but i try the alternate and orig. xell il Jrunner....no luck
Click to expand...
Unless the light stops, it's not glitched.

Coronas need short wires for all connections. Make them as short as you can. Also confirm the console still boots if you write the original NAND back.
 
V

VinT_BLR

Full Member
Mar 13, 2012
30
0
Belarus. Minsk
Try this. 1.Solder blue wire 10cm long to point under x-clamp. 2. Add additionally 50cm to yellow wire. In this way, I still have never had any problems with corona's. Hope this helps
 
G

goldmoon

Junior Member
Dec 5, 2011
23
0
Yes, if write back original nand the box is booting.
i tried with short cabels but in this case the glitching is not normal. The green leg light 8-10sec two times and then the gliching is stopped...
 
pengekcs

pengekcs

BANNED
Mar 1, 2010
216
0
EU
I now always use cca. 55cm long wire for post out (point C) (from slim coolrunner wire package, the blue one). Corona usually glitches immediately or under 1 minute. The trinity consoles also glitch maybe not at first but in 4-5 tries always with this setup. 4-5 tries menas waiting for max. 5 minutes, if it's not booting or freezes (high pitched fan) then I restart and / or move the wires a bit. cpu_rst is around 10cm (point D).

Take heed not to run any of the wires near coils on the motherboard.
 
G

goldmoon

Junior Member
Dec 5, 2011
23
0
I tried this metolds too but no luck with this:(

---------- Post added at 15:19 ---------- Previous post was at 15:17 ----------

If I use short 8-12cm cable on the Cpu rst the glith is not normal..to long time light the green led(8-10sec or long) and only twice...then the glithing is stopped, and only a chirr sound come from the mb...
 
G

goldmoon

Junior Member
Dec 5, 2011
23
0
I not used the pins always, but remove it again. I tried it any lenght without pins but no result.
I give it a chance to kynar wire, and try it afternoon.
 
You must log in or register to reply here.