DGX same problem anytime!! why?

N

nachete2k

Noob Account
Dec 23, 2011
9
0
I'm frustrated I used the 1000 possible lengths this in my 2 trinity
and now a Corona with the pampering and I do not take one week bad looking and searching and my two plates, each with one pad spoiled each with a different but what I say with mimes result ..

Here is the log of my JR-Programmer if someone helps me but he said I have
I ended up with little wiring should be correct and still frustrated:facepalm::mad2:

"J-Runner v0.2 Beta (286) Started



Checking Files
Finished Checking Files
Version: 01
Flash Config: 0xFFFFFFFF
IoTimedOut

IoTimedOut:No more bytes!
Reading Nand to C:\Users\NENE2K\Desktop\XBOX360 New\J-Runner v02 Beta (286) Core Pack\J-Runner v02 Beta (286) Core Pack\output\nanddump1.bin
Wrong Version.
Version: 00
Wrong Version.
Version: 00
Wrong Version.
 
N

nishat

Junior Member
Jan 6, 2012
12
3
India
If u have corona ver 2 or 4 u need sd card adaptor to dump your nand which version of corona u have.
 
Antalpromille

Antalpromille

VIP Member
Aug 4, 2011
3,146
0
Borås, sweden
Why does your topic tell me its a DGX problem when you are having problem with dumping your nand? And why dont you follow the rules and post pictures of your install?
 
N

nachete2k

Noob Account
Dec 23, 2011
9
0
Corrona v1 is a smart version hunyx obiamente follow the instructions in the tutorial dgx installation but with the same results and is not a 250gb 4gb.

---------- Post added at 07:37 ---------- Previous post was at 07:31 ----------
Ubergeek said:
Is it a genuine DGX for starters
Click to expand...
I hope obiamente TX d products are original and I try españan acquire original is hard to find availability and warranty on all "http://www.modtraders.co.uk/product.php?productid=508&cat=33&page=1"
 
N

nachete2k

Noob Account
Dec 23, 2011
9
0
FlipMode said:
You haven't even got a proper nand dump.

What does proper wire length have to do with dumping the Nand?
Click to expand...
I've never been able to extract the nand.

2nd in my Trinity ran the wiring DGX both 120cm and like the original that came in the box that if I tried the 50-20 cm and with different cables etc and just in case but after 8-10 attempts started the DGX give me red light. there was time to confirm that the DGX worked'm now on the crown with elcableado supposedly valid for all
90cm and 8cm but tb I worked the 10-14cm of points D and C which for reasons of bad luck one of those pad has been damaged in the plates trinity :facepalm:

Well in my attempt DGX my guess is original because I lanze with CORONA plate and I only had to turn the DIP 8 and go without failure and the first all right but I still have the same LOG if I forget to look something tell me toy maybe something silly :biggrin:

thus waiting for my QBS as this "supposedly" would solve mifallo in what I think is the RESET because I've been so thanks.

and that's my fault but that???

Sorry for if I understand completely what I comentais since google translator is well but I try to understand everything correctly as possible thanks. :)
 
F

FlipMode

VIP Member
May 4, 2005
296
0
Woodstock, Ontario
nachete2k said:
I've never been able to extract the nand.

2nd in my Trinity ran the wiring DGX both 120cm and like the original that came in the box that if I tried the 50-20 cm and with different cables etc and just in case but after 8-10 attempts started the DGX give me red light. there was time to confirm that the DGX worked'm now on the crown with elcableado supposedly valid for all
90cm and 8cm but tb I worked the 10-14cm of points D and C which for reasons of bad luck one of those pad has been damaged in the plates trinity :facepalm:
Click to expand...
First of you need to read the Nand before ever wiring in the DGX.

First

Identify your Motherboard!!

Make sure you have what you need before you proceed!!



Read Nand
  1. Trinity uses Nand-X or JR Programmer
  2. Corona V1 and V3 uses Nand-X or JR Programmer
  3. Corona V2 and V4 uses Corona 4GB R/W kit
You will need to do wire install or QSB install, I will leave this up to you to figure out.

Read Nand verifying you have 2 Good dumps

Write DGX to Nand

CLICK ME!

Wire DGX

RIGHT HERE!

Glitch to get CPU Key
:biggrin:


Reverse order

Uninstall DGX
Write Stock Nand back to Xbox
Verfiy no errors
Make sure Xbox boots
For Wire install remove Nand wiring
For QSB install leave QSB on motherboard
 
Last edited:
  • Like
Reactions: tesei
N

nachete2k

Noob Account
Dec 23, 2011
9
0
FlipMode said:
First of you need to read the Nand before ever wiring in the DGX.

First

Identify your Motherboard!!

Make sure you have what you need before you proceed!!



Read Nand
  1. Trinity uses Nand-X or JR Programmer
  2. Corona V1 and V3 uses Nand-X or JR Programmer
  3. Corona V2 and V4 uses Corona 4GB R/W kit
You will need to do wire install or QSB install, I will leave this up to you to figure out.

Read Nand verifying you have 2 Good dumps

Write DGX to Nand

CLICK ME!

Wire DGX

RIGHT HERE!

Glitch to get CPU Key
:biggrin:


Reverse order

Uninstall DGX
Write Stock Nand back to Xbox
Verfiy no errors
Make sure Xbox boots
For Wire install remove Nand wiring
For QSB install leave QSB on motherboard
Click to expand...

That's what I'm waiting but if it works well, should also be working with the welds
 
F

FlipMode

VIP Member
May 4, 2005
296
0
Woodstock, Ontario
nachete2k said:
That's what I'm waiting but if it works well, should also be working with the welds
Click to expand...
I have no idea what you are trying to say.

Without detailed information we are getting nowhere and you will need to take it to someone that knows what they are doing.

If you can't help us we can't help you.
 
N

nachete2k

Noob Account
Dec 23, 2011
9
0
You must log in or register to reply here.