Did I blow it with my Xecuter 3?

[digitaldave2]

I just installed my Xecuter 3 with solderless adapter. After it was all peachy I was able to log onto the box through flashbios. I ended up uploading the wrong bios. No when I turn it on it will stay on for a second, turn off, come back on and the eject button flashes green and red. Is their any way to reset it so I can put the right bios on??

 

[giantman]

I just installed my Xecuter 3 with solderless adapter. After it was all peachy I was able to log onto the box through flashbios. I ended up uploading the wrong bios. No when I turn it on it will stay on for a second, turn off, come back on and the eject button flashes green and red. Is their any way to reset it so I can put the right bios on??

Try booting into the backup bios (Eject and Power), if that don't work try selecting a single 256k bank as mine has flashbois on all the banks.

Once you found flashbois, select ON ON OFF OFF OFF or if you have the X3CP it's OFF ON ON OFF OFF

 

[wta306]

Try booting into the backup bios (Eject and Power), if that don't work try selecting a single 256k bank as mine has flashbois on all the banks.

Once you found flashbois, select ON ON OFF OFF OFF or if you have the X3CP it's OFF ON ON OFF OFF

and if that doesn't work...what are the options from there?

I can't bring up FlashBios on any banks.

 

[EZ23]

you always can bring up flash bios hold power/ eject buttons, yes btoh at the same time and then on,on,off,off,off and flash the damm chip already. You really should read more before jumping into somthing.

 

[DJBOOBY]

if you can not get flashbios you will have to do a hotswap to your chip to get working bios once you get x3 bios on chip flash backup bank with working flashbios use x3 bios to do this
flashbios 3.0.1 for v1.6 xbox
flashbios 3.0.3 for v1.0 to v1.5 and v1.6b xbox