GENERAL Did something Stupid, what do i need to buy to fix it??

[Gamers]

Please help me, i connected my liteon up to my pc via sata and used by xbox to power it.

As i already had my dummy files but didn't have my ck3 i brought as my old house had a fire and my things got moved into storage.

I was impatient and connected everything up, and now in jungle flasher nothing shows up, how can i fix this please help, i was being impatient.

 

[Teajunkie]

load the firmware and connect the drive and click lol erase ensuring the right port is selected and also check you have removed the via drivers.

 

[Gamers]

i did everything good, then Jungle flasher just froze when i clicked "Write". I'm like freaking out

 

[piromaniac]

sounds more like a pc hardware issue, do U have access to another pc if so try it out.

 

[Martin C]

ok stop.

Let me get something straight. You asked "What is the bare minimum for flashing a drive".

I told you the answer and ALSO said you won't get any support.

Why are you posting?

 

[Gamers]

I know, but i brought a ck3 around a year ago and they have been in storage since the fire, i cant get it out i've waited for ages to play xbox, i just didnt have the money to buy another kit i will if i have to.

Just tell me what i need to buy

 

[mattjk88]

lol, why are you "freaking out"? Gotta love yanks

What chipset?

 

[Gamers]

32 bit computer, via card is VIA VT6421 RAID

 

[piromaniac]

Please help me, i connected my liteon up to my pc via sata and used by xbox to power it.

As i already had my dummy files but didn't have my ck3 i brought as my old house had a fire and my things got moved into storage.

I was impatient and connected everything up, and now in jungle flasher nothing shows up, how can i fix this please help, i was being impatient.

lol, why are you "freaking out"? Gotta love yanks

What chipset?

i don't appreciate that comment; we are all one community on this forum regardless of where your from. Albeit it might only be a joke on your behalf but to some its rude and inconsiderate..

 

[Gamers]

Can someone please help, i would be forever grateful

 

[sherlock]

ok,

in jungleflasher go to the firmware Tool 32 tab and click the open source tab and pick your dummy.bin as source and let jungleflasher autoload target firmware.
on the MTK Flash tab click on lite-on erase and follow the prompts, if you don't get vendor mode
keep trying the intro/Device ID button and powercycle the drive untill you get vendor mode.
when you get this

Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

click write
then when it's written click outro, job done.

 

[mattjk88]

Albeit it might only be a joke on your behalf but to some its rude and inconsiderate..

I'm a pretty inconsiderate person, don't sweat it bro its only the interwebs

Anyway, you using a compatible chipset, so as Teajunkie stated you should be able to go ahead with Liteon erase and get good flash properties. (the Liteon will ONLY give good flash properties if the FW is erased, hence MRA method to trick controller)

Infact if nothing is showing up the FW may already be erased, just intro the device and hopefully that should do it...

 

[sick360mods]

we told u in the 2nd post what to do

 

[Gamers]

ok,

in jungleflasher go to the firmware Tool 32 tab and click the open source tab and pick your dummy.bin as source and let jungleflasher autoload target firmware.
on the MTK Flash tab click on lite-on erase and follow the prompts, if you don't get vendor mode
keep trying the intro/Device ID button and powercycle the drive untill you get vendor mode.
when you get this

Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

click write
then when it's written click outro, job done.

Omg thanks so much, but when i get to writing bank 0... it freezes?? I have the thing disabled

 

[sick360mods]

re enanble it and try again if that dosnt work then u need a usbpro

 

[Gamers]

Ok thanks alot, my dummy is version 1.1 and im trying to upgrade to teh newest one could this be the problem.

 

[sick360mods]

no that wont be the problem

 

[Gamers]

OMG I LOVE YOU GUYS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I THINK IVE DID IT, GOING TO CONNECT TO MY TV NOW GUYS IF THIS WORKS I WILL BE THE MOST HAPPY GUY IN THE WHOLE WORLD

---------- Post added at 13:43 ---------- Previous post was at 13:33 ----------

oK I PUT IN A PREVIOUSLY GAME THAT I HAD BURNT AND IT JUST SAYS OPEN AND CLOSE TRAY,

mY DASHBOARD IS 2.0.13599.0??

---------- Post added at 13:50 ---------- Previous post was at 13:43 ----------

GOT IT WORKING, YOU GUYS ARE THE BEST

 

[sherlock]

glad your sorted.

 

[sick360mods]

glad you got it working