Hi all is it safe on dash 2.0.13599.0 is asking for update when try play my new game just got out shop my console on lt 3.0 at mine thanks.
DISK UPDATE
- Thread starter besty
- Start date
Phat or slim? You should always revert to stock before updating your dashboard, just common sense, but if you can't..
Edit: Also why is this in the iHAS section, should be in Firmware.
Edit: Also why is this in the iHAS section, should be in Firmware.
Last edited:
I got the xbox after it had bin flashed so got no keys for it it lit-on is there easy way to do it thanks.
Follow this guide , Read the Key and Flash it back to stock & Update it with 14719 & Re-Flash it to LT 3.0 , Job Done !
Last edited:
Utmad
VIP Member
Stuff required .
- X360 USB Pro2
- CK3 Probe 3 (If The Drive is a Phat liteon) in order to extract Dummy.bin(DVD KEY)
Or
- X360 USB Pro
- CK3 (Lite or Pro or earthier a CK3i)
- CK3 Probe 3 (If The Drive is a Phat lite-on) in order to extract Dummy.bin(DVD KEY)
Last edited:
I got usb pro and molex power and ck3 ,so do you have to prob to get key even after it bin flashed .
Vinneh
VIP Member
If you have the dvd key then you do not have to use the probe 3. If you don't have the dvd key then you do have to use the probe 3 to get the key.
what you mean by there ?
is it on your PC or the DVD Drive itself ?
if you need don't have dummy.bin in your PC then you need the Probe 3 to extract the Dummy.bin(DVD Key) .
What I was asking if I not got dummy.bin and it bin flashed I got to prob it to get key even after it bin flashed .
Yes, if you don't have dummy.bin you need to probe to get it. Even if it's already flashed.