LITEON 0225 DIY "Sputnik" & X360USB - MXIC

[Suicyde]

Right - my apologies in advance if I'm taking a fkin liberty here, I've had my head buried in work last week or two.

Is it possible (while I wait for my Sputnik Probe) to do the DIY method (trace cut & resistor) within JungleFlasher with X360USB on a 0225 with MXIC?

I've had a browse, couldn't find anything concrete, and also had a quick play, and got 0x0 for SPI...but couldn't write anything unfortunately!

Thanks in advance for any advice.

 

[TilVl]

I got a 0272 drive. Use the DIY sputnik and it works fine.

Cut trace, used a switch and wired it.

So now I just take my drive apart and flip the switch. Update firmware or what ever and reflip it. Then relock the drive.

Works great for me.

 

[Suicyde]

What a douche...check the JF tut Cyde you ****!

 

[WNYConsoles]

I haven't worked with Slim flashing or anything like that, but I am curious about this Sputnik Switch. From what I read, you just solder the PCB Switch onto ?ANY? Slim drive and you can unlock it?

Does this work for all Slim drives or only certain models?

 

[MANUMAN]

its only for slim drives with a mxic chipset does not work with winbond

 

[jaycboy]

try this

 

[jaycboy]

ooo sorry 0225 ur on the dremmel and resistor method :s

 

[diaboliq20]

ooo sorry 0225 ur on the dremmel and resistor method :s

That's just for winbond isn't it?

 

[fproveti]

That's just for winbond isn't it?

Hi all.. For those who are familiarized with the Kamikaze method, like me.....

I just got an MXIC of June 2010 unlocked and working with Kamizake. All the same easy process with USB360PRO and JungleFlasher 1.89. It was flashed with the LT+2.0 and already tested with the game RAGE.

Any doubts, do not hesitate on asking...

Bye...

 

[Martin C]

Of course the Kamikaze works with MXIC - it's essentially the same chip so the SPI wire is on the same pin.

Why run the risk of drilling the chip when a simple cut trace and probe sorts it for you?

 

[fproveti]

Well, you are pretty right. But, i just lost one board since i begun the kamikaze method that it´s simple for me. It´s just on the "Point and drill" way. I just posted, because some people believe that it not works and period. It was just for knowledge purposes.

Thanks.