GENERAL Do i need anymore

[JyuubiNaruto]

http://www.modchipcentral.com/store/product.php?productid=17731&cat=282&page=1
X360USB Pro Mega Bundle #2 Jungleflasher Edition

The ultimate collection of 360 DVD Upgrade & Repair Tools.

XECUTER X360USB PRO JungleFlasher Edition
XECUTER CK3 PRO (REV D)
XECUTER CK3 PRO CASE
XECUTER CK3 PROBE 3
XECUTER HDD ADAPTER (PHAT DRIVES)
XECUTER UNLOCK KIT (SLIM OR PHAT, DEPENDING ON WHAT YOU CHOOSE FROM THE DROPDOWN MENU)

As well, it comes with all cables that come with each device listed above.

If i buy this do i need to know my slim drive and if so what else would i need to buy

 

[sp4rkst4rt3r]

Depends....... which drive you have?

 

[titcave]

Yes this kit is for phat with probe 3
You need Spoutnik probe or switch
or dremel if it's winbond
you should open your drive to see first

 

[wyospartan117]

If you have a phat liteon, you're set!

 

[JyuubiNaruto]

I said slim dude

 

[Catevari]

If you take the slim options you should be alright, but you could be getting extra that you don't necessarily need, but you could always use the trader forum to sell or trade stuff thats not necessary.

You should check to at least see what chipset you have in the DVD drive to tell you more, if you take apart the 360 and take the drive out, then open the dvd drive case and look at the chip on the board it will either have a 03 in the beginning which is MXIC or 05 which is Winbond.

If its a 05 you will either need to do a kamikaze hack or get a replacement unlocked PCB from TX.

The main things you need are the X360USB Pro, a power option (CK3 Pro or lite) to flash a drive. Other tools are needed depending on the path you pursue. MXIC you would need a sputnik probe or switch depending on if you want to probe it each time or use a switch, Winbond needs a dremel, knife or soldering iron to drill/cut/burn into the chip to sever a trace, or the unlocked PCB which is just simple.

 

[sp4rkst4rt3r]

I said slim dude

Depends....... which drive you have?

It is necessary to know exactly which revision of SLIM drive you have before confirming what 'Kit' you need

You could have a Hitachi for example :rolleyes2:

You need to tell us exactly what revision drive you have in your SLIM :wink:

If you take the slim options you should be alright, but you could be getting extra that you don't necessarily need, but you could always use the trader forum to sell or trade stuff thats not necessary.

You should check to at least see what chipset you have in the DVD drive to tell you more, if you take apart the 360 and take the drive out, then open the dvd drive case and look at the chip on the board it will either have a 03 in the beginning which is MXIC or 05 which is Winbond.

If its a 05 you will either need to do a kamikaze hack or get a replacement unlocked PCB from TX.

The main things you need are the X360USB Pro, a power option (CK3 Pro or lite) to flash a drive. Other tools are needed depending on the path you pursue. MXIC you would need a sputnik probe or switch depending on if you want to probe it each time or use a switch, Winbond needs a dremel, knife or soldering iron to drill/cut/burn into the chip to sever a trace, or the unlocked PCB which is just simple.

Great you went through all the options......what if he has a 0500 HITACHI :eek2:

You have just adised him to buy kit that will not flashhis drive if it is a dreaded 0500 HITACHI :facepalm:

 

[Catevari]

Not necessarily. I said X360USB and CK3 would be needed, which even for 0500 its necessary as all slims need a x360usb and ck3 since theres very few sata chipsets that are compatible. I also said confirming which drive is best if you read my post properly.

And I also went over that a TX Unlocked Replacement PCB is easiest of all options, which should work in a 0500 Hitachi as well if I am not mistaken, just flash is as a 9504/0272 with the hitachi key I believe works, if not then I am mistaken. But as everyone has been saying, including me, confirming your drive is best. Also arent 0500 Hitachi's extremely rare at the moment?

 

[sp4rkst4rt3r]

My point is if he tells us the drive version, see this http://team-xecuter.com/forums/showpost.php?p=440599&postcount=2 then we can move on without speculation :biggrin:

Since LT+ was released c4eva has told us NOT to Spoof drives as these can be detected by M$ so I would have to disagree with your statement with regard to the Hitachi :rolleyes2:

Nothing personal and no offence intended, we are all here to help :tongue:

Yes Hitachi's are very rare but they are out there...doh!!!

 

[aneyboy]

Dont think you get molex cable (power lead) with this pack or at least i didnt,might be worth checking out.Hope this helps.

 

[NoUseForAName]

Very nice bundles on that site, never knew of that place for the life of me. I might have to buy a bundle but like you said it may or may not come with molex cable power lead.

 

[aneyboy]

I have used mr modchips.co.uk and ck3.co.uk and have been amazed at the speed of delivery,can recommend either,just see who is doing the best deal,you wont go wrong.

 

[NoUseForAName]

I am in canada so anything with great prices and service is worth checking into.

 

[aneyboy]

If you got the money and the molex lead is not included in the deal, have a look as this little beauty http://www.ck3.co.uk/product.php?productid=245 Makes the whole process mobile and you dont have to worry about another lead as the molex power lead i got is only about 1m long.