does my xbox need to have the LPC rebuilt?

[electpoopie]

ok ive got a version 1.6 xbox i got xecuter 2.6 CE but i have the xapt3r 1.6 so do i need need to rebuild the LPC?

 

[electpoopie]

anyone???!!!

 

[DJBOOBY]

do not need rebuild thats why its called solderless

 

[electpoopie]

do not need rebuild thats why its called solderless

ok and i looked in the tut for the xapt3r 1.6 wtf is the 5v thingie

btw do u got msn, yahoo, or AIM?

 

[Fantmx]

What do you mean what is it? The 1.6 board requires you to get 5v power from another source.

 

[electpoopie]

ok look at this pic for the 5v, i got the xapt3r 1.6 and does it come with the red wire?

http://www.bald.claranet.com/xapt3r16b.jpg

 

[electpoopie]

ok look at this pic for the 5v, i got the xapt3r 1.6 and does it come with the red wire?

http://www.bald.claranet.com/xapt3r16b.jpg

ok i did get an alternate 5v wire BUT i have to solder it but im getting the solderless adapter so i have to solder the 5v wire onto the power source thingie?

 

[DJBOOBY]

solderless should have a small red clamp to connet v5 connection

 

[electpoopie]

ok and what about the holes in my motherboard u no where xapt3r 1.6 legs go?

they r blocked (only some) how do i fix this? or do i just set the legs on those?

 

[DJBOOBY]

solder the chip in or get someone to do it for you

 

[Fantmx]

You should be able to just put the legs on the holes that have solder in them. Take a stiff eraser or a q-tip with some nail polish remover to make sure you get good contact.

 

[electpoopie]

ok ya its all soldered and everything but i think i connected the D0 wire is wrong. I soldered it on the lpc rebuild like i was supposed to but the screen to flash my bios doesnt show up

 

[DJBOOBY]

it go on to lpc recheck all soldering points

 

[electpoopie]

ya there are two the r not soldered and is it possible to redo the whole thing?
i got anotther pinheader and rebuild