1st time i using dgx, currently using the alternate ecc after no luck with 1st ecc. Its a corona v1, on 16202 dash, dip 8 on...just waiting and waiting and waiting...the blue cpu rst has any favorable length?
DGX dont know if anything wrong
- Thread starter wizpanda
- Start date
hotbird_05
BANNED
- Jun 25, 2012
- 211
- 18
ok, usb not connected to pc...took it out programmer to be safe, didnt save any jrunner log...are you referring to comm monitoring (i was reading about it earlier) aint make it yet, maybe tomoro...will try more pics
jligg
VIP Member
Being it's a corona, cut your post and cpu_rst wire as short as possible and it will glitch
Sent from my ADR6400L using Tapatalk 2
---------- Post added at 21:27 ---------- Previous post was at 21:26 ----------
Cut them to length, just to reach there points
Sent from my ADR6400L using Tapatalk 2
Sent from my ADR6400L using Tapatalk 2
---------- Post added at 21:27 ---------- Previous post was at 21:26 ----------
Cut them to length, just to reach there points
Sent from my ADR6400L using Tapatalk 2
jligg
VIP Member
Blair7635
Noob Account
Use the ground slim wire for your CPU_RST and the CPU_RST slim wire for your POST_OUT and Coil it around the heat sink clamps
Last edited:
@muchose lol...connections are good...programmer connections have been used on countless xboxs, thats burnt flux and dust etc..
cpu rst and post tommorrow...already retired for the night thx..
cpu rst and post tommorrow...already retired for the night thx..
Blair7635
Noob Account
hotbird_05
BANNED
- Jun 25, 2012
- 211
- 18
for CPU_RST use 11cm only , solder it to FT3T10 point
---------- Post added at 21:15 ---------- Previous post was at 21:13 ----------
http://www.abload.de/image.php?img=coronaboardunterseitewwued.jpg
---------- Post added at 21:15 ---------- Previous post was at 21:13 ----------
http://www.abload.de/image.php?img=coronaboardunterseitewwued.jpg
no luck with this solution @ hotbird, ...but 1st time i using this alternate rst point, i like not having to take off heatsink...going and try shortening post. i never used a post that long b4.
Martin C
VIP Member
has anyone used ft3t10 point in regular modding...not dgx...i curious to know if it give good results or finnicky?
Also been searching and found what seems to another rst alternate ...looks like FT4R2 (near to original point)..anyone ever used it?
Also been searching and found what seems to another rst alternate ...looks like FT4R2 (near to original point)..anyone ever used it?
Something kinda bothering me, how come suggested rst so short but when the coolrunner chip is installed we have to serpent a long wire?
---------- Post added at 19:10 ---------- Previous post was at 19:04 ----------
I forgot about changing the ecc after i made changes to wire lengths...i tarting back with original ecc..btw i think jrunner uses nandpro 3, i could be wrong but it gives that fail to write msg but it wrks. Nandpro 2 doesnt give errors.
Tuesday, February 19, 2013 8:27:49 AM
J-Runner v0.2 Beta (287) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
The remote server returned an error: (404) Not Found.
Finished Checking Files
Initializing nanddump1.bin..
Nand Initialization Finished
Version: 01
Flash Config: 0x00043000
Writing Nand
CORONA_16MB_DGX.ecc
Failed to write 0x0 block
Failed to write 0x1 block
Failed to write 0x2 block
Failed to write 0x3 block
Failed to write 0x4 block
Failed to write 0x5 block
Failed to write 0x6 block
Failed to write 0x7 block
Failed to write 0x8 block
Failed to write 0x9 block
Failed to write 0xA block
Failed to write 0xB block
Failed to write 0xC block
Failed to write 0xD block
Failed to write 0xE block
Failed to write 0xF block
Failed to write 0x10 block
Failed to write 0x11 block
Failed to write 0x12 block
Failed to write 0x13 block
Failed to write 0x14 block
Failed to write 0x15 block
Failed to write 0x16 block
Failed to write 0x17 block
Failed to write 0x18 block
Failed to write 0x19 block
Failed to write 0x1A block
Failed to write 0x1B block
Failed to write 0x1C block
Failed to write 0x1D block
Failed to write 0x1E block
Failed to write 0x1F block
Failed to write 0x20 block
Failed to write 0x21 block
Failed to write 0x22 block
Failed to write 0x23 block
Failed to write 0x24 block
Failed to write 0x25 block
Failed to write 0x26 block
Failed to write 0x27 block
Failed to write 0x28 block
Failed to write 0x29 block
Failed to write 0x2A block
Failed to write 0x2B block
Failed to write 0x2C block
Failed to write 0x2D block
Failed to write 0x2E block
Failed to write 0x2F block
Failed to write 0x30 block
Failed to write 0x31 block
Failed to write 0x32 block
Failed to write 0x33 block
Failed to write 0x34 block
Failed to write 0x35 block
Failed to write 0x36 block
Failed to write 0x37 block
Failed to write 0x38 block
Failed to write 0x39 block
Failed to write 0x3A block
Failed to write 0x3B block
Failed to write 0x3C block
Failed to write 0x3D block
Failed to write 0x3E block
Failed to write 0x3F block
Failed to write 0x40 block
Failed to write 0x41 block
Failed to write 0x42 block
Failed to write 0x43 block
Failed to write 0x44 block
Failed to write 0x45 block
Failed to write 0x46 block
Failed to write 0x47 block
Failed to write 0x48 block
Failed to write 0x49 block
Failed to write 0x4A block
Failed to write 0x4B block
Failed to write 0x4C block
Failed to write 0x4D block
Failed to write 0x4E block
Failed to write 0x4F block
Done!
in 0:30 min:sec
---------- Post added at 19:10 ---------- Previous post was at 19:04 ----------
I forgot about changing the ecc after i made changes to wire lengths...i tarting back with original ecc..btw i think jrunner uses nandpro 3, i could be wrong but it gives that fail to write msg but it wrks. Nandpro 2 doesnt give errors.
Tuesday, February 19, 2013 8:27:49 AM
J-Runner v0.2 Beta (287) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
The remote server returned an error: (404) Not Found.
Finished Checking Files
Initializing nanddump1.bin..
Nand Initialization Finished
Version: 01
Flash Config: 0x00043000
Writing Nand
CORONA_16MB_DGX.ecc
Failed to write 0x0 block
Failed to write 0x1 block
Failed to write 0x2 block
Failed to write 0x3 block
Failed to write 0x4 block
Failed to write 0x5 block
Failed to write 0x6 block
Failed to write 0x7 block
Failed to write 0x8 block
Failed to write 0x9 block
Failed to write 0xA block
Failed to write 0xB block
Failed to write 0xC block
Failed to write 0xD block
Failed to write 0xE block
Failed to write 0xF block
Failed to write 0x10 block
Failed to write 0x11 block
Failed to write 0x12 block
Failed to write 0x13 block
Failed to write 0x14 block
Failed to write 0x15 block
Failed to write 0x16 block
Failed to write 0x17 block
Failed to write 0x18 block
Failed to write 0x19 block
Failed to write 0x1A block
Failed to write 0x1B block
Failed to write 0x1C block
Failed to write 0x1D block
Failed to write 0x1E block
Failed to write 0x1F block
Failed to write 0x20 block
Failed to write 0x21 block
Failed to write 0x22 block
Failed to write 0x23 block
Failed to write 0x24 block
Failed to write 0x25 block
Failed to write 0x26 block
Failed to write 0x27 block
Failed to write 0x28 block
Failed to write 0x29 block
Failed to write 0x2A block
Failed to write 0x2B block
Failed to write 0x2C block
Failed to write 0x2D block
Failed to write 0x2E block
Failed to write 0x2F block
Failed to write 0x30 block
Failed to write 0x31 block
Failed to write 0x32 block
Failed to write 0x33 block
Failed to write 0x34 block
Failed to write 0x35 block
Failed to write 0x36 block
Failed to write 0x37 block
Failed to write 0x38 block
Failed to write 0x39 block
Failed to write 0x3A block
Failed to write 0x3B block
Failed to write 0x3C block
Failed to write 0x3D block
Failed to write 0x3E block
Failed to write 0x3F block
Failed to write 0x40 block
Failed to write 0x41 block
Failed to write 0x42 block
Failed to write 0x43 block
Failed to write 0x44 block
Failed to write 0x45 block
Failed to write 0x46 block
Failed to write 0x47 block
Failed to write 0x48 block
Failed to write 0x49 block
Failed to write 0x4A block
Failed to write 0x4B block
Failed to write 0x4C block
Failed to write 0x4D block
Failed to write 0x4E block
Failed to write 0x4F block
Done!
in 0:30 min:sec
Last edited:
jligg
VIP Member
ok, no luck yet though...
---------- Post added at 19:31 ---------- Previous post was at 19:26 ----------
using ecc 2 again...interestingly the no more beeping noise, green light blinks with a different pattern (much shorter intervals) and a bit irregular too...correct me if wrong the green light will stay off when it boots correct?
---------- Post added at 19:38 ---------- Previous post was at 19:31 ----------
a wire came out...the high frequency noises are back..
---------- Post added at 19:31 ---------- Previous post was at 19:26 ----------
using ecc 2 again...interestingly the no more beeping noise, green light blinks with a different pattern (much shorter intervals) and a bit irregular too...correct me if wrong the green light will stay off when it boots correct?
---------- Post added at 19:38 ---------- Previous post was at 19:31 ----------
a wire came out...the high frequency noises are back..
you know the $%#^ looks like it glitch...I thought the controller light would be on looks like i wrong...trying to get ip working without luck though