dos

naughtsmart

Full Member
Feb 10, 2003
35
0
when i try and get to dos all that happens is it says is J


i have samsung ms28 drive and im using textbook.pdf instructions

what can i do to get it in to dos? i need help
 

RSX_Integra

Full Member
Feb 9, 2003
53
0
use uprip create a usb key or on a floppy itll create the boot for going into dos or u can use ntfs cd its all in the download section
 

naughtsmart

Full Member
Feb 10, 2003
35
0
i looked in the downloads and i cant find it any where.
but when i do find it what do i do with it? :oops: :?:

ow i am trying to do the iExtreme1.2c firmwere and i picked the fast one not the quiet one.
 

mmaverick

Loyal Member
Dec 7, 2002
382
0
this is version 0.0.2.. the newest one.
https://www.x-projects.org/request.php?21

also look around, i've explained the process to somebody else recently, or check textbook's tutorial in the downloads section.
 

naughtsmart

Full Member
Feb 10, 2003
35
0
i have already did this before i posted this tread. But when it should go into dos it just says J and i do not know why i use iprep and it loaded to my usb SanDisk. It is a SanDisk cruzer micro 2.0 GB. i dont know what to do and did use the textbook guide.
 

zerach

Console Master
Dec 8, 2002
1,351
0
if you have a floppy try that(DONT DO A IDUMP) to see if you can get it to boot in dos on a floppy.we can go from there if that works
 

zerach

Console Master
Dec 8, 2002
1,351
0
what are you doing to boot on to the usb flash
did you go into the bios and set it up.
in my computer i had to build the usb bootable.leave it in the usb port.restart the computer go strait into the bios
i had to set boot other divieces and usb zip on top.
let me know just what you are doing

you dont wont to use the floppy unless all else has failed
 

naughtsmart

Full Member
Feb 10, 2003
35
0
yea we went into the bios and set it up that way. We tried a thumb drive first but all we got with that was the letter J, and the same with an SD card. The floppy is the first item that actually got us into DOS. THe IPrep page has now come up in DOS, and we can finally enter a command. The instructions that we were following say to use IDump now, but you said not too. We're using the textbook guide. What should we do?
 

zerach

Console Master
Dec 8, 2002
1,351
0
well there is a different way to flash using the harddrive in the computer(i dont know it) it would be better than using the floppy.

or you can do it with the floppy(ive did many no problems BUT it a floppy).if you use a floppy after you do idump and it says reboot your computer DONT give it some time 4/5 min then samtool will run and build your hacked firmware.after that you can turn off the computer and reboot go in the backup folder and save the orig bin in many places and off the computer also.email it to your self burn it to a cd anything and every thing.if this gets lost you will have a dead box if thing go wrong.then just do the same thing but do iflash.

let me know
 

naughtsmart

Full Member
Feb 10, 2003
35
0
"then just do the same thing but do iflash." Hey thanks we get everything else. We are just sorta confused with what u mean by this.
 

zerach

Console Master
Dec 8, 2002
1,351
0
after you have saved your orig firmware then put the floppy back in reboot.then run iflash doing the same thing you did to idump it will flash your drive and its all done

remeber you will have to do the 10 sec trick to get in.its all in here
http://www.360mods.net/Downloads/details/id=61.html

the 10 sec trick works great for me