LITEON 9504 doubts with the material need

[pocket]

Hello

I have a slim with dashboard 1625 i need to now what is the necessary material

My drive have the first LT 1.91 i think it´s the first one for this drive.

What i need first?? upgrade the dashboard do 13599 and then buy a pcb???

Sorry for my bad english but i need help

tanks a lot

 

[diaboliq20]

first of all - do you have all the original dumps of your drive??
If not - do that first......
then flash to stock...
update....
this will flash and lock your drive to an 0272
then either unlock it via kamikaze or sputnik depending in MT chip
then reflash - or you could by an unlocked PCB after the update and flash that

 

[pocket]

first of all - do you have all the original dumps of your drive??
If not - do that first......
then flash to stock...
update....
this will flash and lock your drive to an 0272
then either unlock it via kamikaze or sputnik depending in MT chip
then reflash - or you could by an unlocked PCB after the update and flash that

Hello

yes i have de original dump.

So i have to put my stock firmware, then upgrade the dashboard and then buy a pcb or someting and upgrade to the last LT.


It´s correct what i´m say

Edit: What is the best or the easy way is the pcb or the sputnik

tanks

 

[diaboliq20]

yes -
1)Flash to stock
2)update dashboard - WARNING - this WILL lock your drive.
3)flash replacement PCB with latest fw
4)install replacement PCB into drive

 

[sk8boy204]

what version of drive is it? what kind of chip is on it. winbound or mxic? if its an mxic you wont have to but the replacement pcb. you can literally do it with $5 and a trip to your local electronics shop. if its a winbound then a replacement pcb is needed.

 

[pocket]

what version of drive is it? what kind of chip is on it. winbound or mxic? if its an mxic you wont have to but the replacement pcb. you can literally do it with $5 and a trip to your local electronics shop. if its a winbound then a replacement pcb is needed.

My drive is a 9504 with dashboard 1625 and with the first LT for this drive
I have an mxic 03 so what i need to buy a resistor ???

 

[rdubbs007]

Hello i have an mxic 03 so what i need to buy a resistor ???

Hello yes a resistor (10ohm) is what you would be looking for

 

[pocket]

Hello yes a resistor (10ohm) is what you would be looking for

Were i cud find an image or something to see here i have to solder the resistor

I have to solder the resistor after upgrade the dashboard correct then i have to unsolder ?? or resistance is always there

I apologize for asking so much but rather be boring than to spoil it all