LITEON 93450 Drive in Vendor, Invalid status 0x80

[kharlisson]

Im trying to flash a Liteon 9series. using, I have key already saved on my computer. drive is in vendor mode. when i go to click write i get invalid status 0x80. here's the log.

JungleFlasher 0.1.87 Beta (277)
Session Started Mon Sep 19 17:04:38 2011

This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 6 I/O Ports.
Found 2 Com Ports.
Found 2 windows drives C: D:
Found 1 CD/DVD drives D:

Lite-On-Erase NOT sent
Loading firmware file C:\Users\ksc\Downloads\Flash Programs\LT 1.91\Firmware\LTPlus-025v1.91.bin
MD5 hash: 5b94b528591d1028f6b1a9d7884c7a55
Genuine LT plus v1.91
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 1.91
Loading firmware file C:\Users\ksc\Downloads\Flash Programs\Drives\Maintence Man\Dummy.bin
MD5 hash: ba74e30883562821ec1f652208d3766e
Inquiry string found
Identify string found
Drive key @ 0xA030 9B76A10059EBFE9876E306C120F37693
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied
No drive present on port 0xE880


Sending Lite-On-Erase request to port 0xE880
..............
Drive returned Status 0x80
..........
Device Intro failed!
Sending Vendor Intro to port 0xE880
Status 0x80
Re-sending Vendor Intro:
....
Serial flash found with Status 0x72

Sending Device ID request to port 0xE880
Spi Status: 0x00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
No drive present on port 0xE880


Getting Status from port 0xE880
Invalid Status 0x80

 

[x360ccm]

have you try this step by step

http://team-xecuter.com/forums/showthread.php?t=66301

 

[vegaslightsss]

Try power cycling drive then send another liteon erase to the correct port and power cycle. Try to write again.

 

[kharlisson]

have you try this step by step

http://team-xecuter.com/forums/showthread.php?t=66301

tried that still got

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.87 Beta (277)
Session Started Mon Sep 19 18:13:29 2011

This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 6 I/O Ports.
Found 2 Com Ports.
Found 2 windows drives C: D:
Found 1 CD/DVD drives D:

Loading firmware file C:\Users\ksc\Downloads\Flash Programs\Drives\Maintence Man\Dummy.bin
MD5 hash: ba74e30883562821ec1f652208d3766e
Inquiry string found
Identify string found
Drive key @ 0xA030 9B76A10059EBFE9876E306C120F37693
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Auto-Loading firmware file C:\Users\ksc\Downloads\Flash Programs\JungleFlasher v0.1.87 Beta (277)\firmware\LTPlus-025v1.91.bin
MD5 hash: 5b94b528591d1028f6b1a9d7884c7a55
Genuine LT plus v1.91
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 1.91
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied

Sending Lite-On-Erase request to port 0xE880
..............
Drive returned Status 0x80
........
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0xE880
Invalid Status 0x80

Getting Status from port 0xE880
Invalid Status 0x80

 

[x360ccm]

chipset prob then.or your timein of the power cycle.

 

[Lizardpcs]

I'd say chipset as it is going to status 0x72 so power cycle timing must be right

---------- Post added at 11:42 ---------- Previous post was at 11:39 ----------

Have you followed the jungle flasher tutorial on how to install your VIA drivers

 

[kharlisson]

I'd say chipset as it is going to status 0x72 so power cycle timing must be right

---------- Post added at 11:42 ---------- Previous post was at 11:39 ----------

Have you followed the jungle flasher tutorial on how to install your VIA drivers

im sure i have. but where can i find this to try again! anyone have a link to that

 

[Lizardpcs]

Jungle flasher website has a link

 

[kharlisson]

had to uninstall my viamraid.sys files, then restart...then i was all good. flashd with no problem. thanx everyone

 

[Lizardpcs]

Glad to hear you got it working.

Remember to press the thanks button for people that helped you