LITEON 0225 Drive no longer spins after flashing LT+ 1.9

[TilVl]

Yes the laser lights up the disc spins for a second(Like barely a spin.) then stops. That is my problem. I didn't clip any wires and they all seem fine. Added a switch but it's not doing anything and was working fine after I added it.

bought a new laser and TX Replacement board.

Ehh, i'll sell the board if the laser works. One all my crap arrives and I mess with it i'll give everyone a heads up.

 

[dragon_unleashed]

Hi guys, even i have a similar problem... I installed the pro kit on my og 0225 pcb and everything went well and after that connected to the pc with my 360usb pro, flashed the drive, locked the spi, did the outro properly. After this I put d drive in my console and popped in a burnt game in and worked perfectly... till here all good.

But after the removed that disc the power led started blinking and the tray comes out and goes in irregularly without any eject button pressed. I removed the drive to chk the problem and found out that the drive laser and the motor wont budge from its place at all, the drive ejects and closes fine from my ck3 but the motor and lens just wont work nymore.

Now after about 50 open/close tries from ck3 the lens and motor worked only about 3 to 4 times otherwise all other times it wont budge.

Guys plz help me with this as its a real headache and can't figure out whats wrong.

 

[alyshehata]

Bump ? Same problem here :/ tx pcb and no spinning

 

[diaboliq20]

Bump ? Same problem here :/ tx pcb and no spinning

Come on man...you should know by now u need ur own thread lol...this one is a month old lol
I've heard of peeps bumping their own threads (which isn't allowed either) but not someone elses lol

Did the OP ever get this sorted?

 

[david ford]

FITTED TX PCB TO 0225 DRIVE , NOW NOT READING ANYTHING

Hi, as anybody sorted the problem with the 0225 drive
i fitted tx pcb flashed the drive all went well put it back in the console and just give out open tray error i do hear the disc spin and have seen the laser lighting up if this helps. regards dave