FIXED drive not detected liteon 16ds2

C

casedup

Junior Member
Jul 12, 2012
10
0
hello guys!
first off my equipment is:
liteon 16ds2 drive
x360usbpro v2
ck3 probe
molex power supply

jungleflasher hung on the outro stage and never completed. now my drive is not detected, i have read around but have no direct answer to the problem i have. i tried unplugging the drive to cycle the power. i tried ejecting the drive on the x360usbpro v2, no luck, it appears dead....help!!





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.92 Beta (304)

Session Started Fri Jul 13 00:35:39 2012



This is a Wow 64 process running on 4 x 64 bit CPUs

X360USB PRO detected, Version 0.18



portio64.sys Driver Installed

portio64.sys Driver Started, thanks Schtrom !

Found 3 I/O Ports.

Found 6 Com Ports.

Found 5 windows drives C: D: E: F: Q:

Found 2 CD/DVD drives D: F:



Loading firmware file C:\Users\taye\Documents\Dummy1.bin

MD5 hash: 842fdfc6b08e31be2b152dfabf309251

Inquiry string found

Identify string found

Drive key @ 0xA030 DBED31904F88DB0C596B3B38BFDACADB

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: PhatKey Extract

Loading firmware file C:\Users\taye\Documents\Dummy1.bin

MD5 hash: 842fdfc6b08e31be2b152dfabf309251

Inquiry string found

Identify string found

Drive key @ 0xA030 DBED31904F88DB0C596B3B38BFDACADB

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: PhatKey Extract

Loading firmware file C:\Users\taye\Documents\Dummy1.bin

MD5 hash: 842fdfc6b08e31be2b152dfabf309251

Inquiry string found

Identify string found

Drive key @ 0xA030 DBED31904F88DB0C596B3B38BFDACADB

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: PhatKey Extract

Loading firmware file C:\Users\taye\Documents\Latest_iXtreme_and_Stock_Firmware_Pack\Firmware\LTPlus-0225-v3.0.bin

MD5 hash: 1a38d3a2a6519339599fa1866642c513

Genuine LT plus v3.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D4S 0225]

Firmware is: LT-Plus 3.0

Spoofing Target

DVD Key copied to target

Key Sector copied from Source to Target

Target is LT - ID strings not copied to Target





Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x90

....................

Device Intro failed!



Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x72

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name: Unknown type

Flash Size: n/a

Unknown flash type Write aborted !



Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x80

......

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !



Sending Vendor Outro to port 0x0000

Sending Vendor Intro to port 0x0000

Status 0x80
 
T

talby71

VIP Member
Nov 24, 2010
3,463
0
Near Melbourne , Australia
since you have your key, start again from liteon erase
 
C

casedup

Junior Member
Jul 12, 2012
10
0
i was going to do just that but i was reading a similar problem someone had. they mentioned that the updated jungleflasher freezes and to use a previous version... tried searching for one of those and the download link is seized :-\
 
T

talby71

VIP Member
Nov 24, 2010
3,463
0
Near Melbourne , Australia
casedup said:
i was going to do just that but i was reading a similar problem someone had. they mentioned that the updated jungleflasher freezes and to use a previous version... tried searching for one of those and the download link is seized :-\
Click to expand...
not everyone has that problem..i never have ..touch wood
 
  • Like
Reactions: casedup
C

casedup

Junior Member
Jul 12, 2012
10
0
'target in buffer not liteon'

Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
....................
Device Intro failed!

---------- Post added at 23:01 ---------- Previous post was at 22:55 ----------

ok waaait!! i forgot to power cycle when i just tried your re-erase trick. it now says this:


Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x0
....
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

---------- Post added at 23:02 ---------- Previous post was at 23:01 ----------

Vendor: Drive in Vendor Mode
 
Antalpromille

Antalpromille

VIP Member
Aug 4, 2011
3,146
0
Borås, sweden
You flashed it with 0225-FW, try lite-on erase and the flash the correct FW. If you are not sure, copy all your ha ked FW to firmware folder i jungle flasher and it will auto select the correct one for you.
 
  • Like
Reactions: casedup and talby71
T

talby71

VIP Member
Nov 24, 2010
3,463
0
Near Melbourne , Australia
Antalpromille said:
You flashed it with 0225-FW, try lite-on erase and the flash the correct FW. If you are not sure, copy all your hacked FW to firmware folder i jungle flasher and it will auto select the correct one for you.
Click to expand...
yep you're right...lol...i missed that
try using the 0251 lt3 file
 
Last edited:
PeteZR1

PeteZR1

VIP Member
Dec 4, 2011
297
33
Spain
In these cases, sorry if this sounds too "old school" but I only use JF for extracting the key in PHAT LiteON. Flashing itself... dosflash16 + l-o-eras, satisfaction garanteed. I've had too many issues flashing LiteON's in JF: JF hanging up, drives that didn't outro, stopping in the middle of writing a bank... too many to mention.
 
You must log in or register to reply here.