FIXED Drive not showing in JungleFlasher

Ceiman

Junior Member
Aug 23, 2017
10
0
Ive got a PC with an i3 2100, fresh install of windows 10 pro 64 bit, and an x360usb pro V2. I also have a CK3 Pro board and an x360usb (original) from about 10 years ago, which still seem to work fine, in case these are any help.
I have Jungleflasher 0.1.94 installed; portio64.sys starts when I disable driver enforcement, and JF finds 4 i/o ports, and 1 COM port.
The log states 4 windows drives (theres 1hdd and 1 usb connected,?!) and 1 cd/dvd drives, (this must be the usb360V2/0225 drive setup) but the drive just isnt showing up in the IO dropdown.

3 of the 4 (0xF0B0, 0xF070, 0xF050) IO ports are showing as empty, and the other (0xF0D0) says "Vendor: Fujitsu", then some serial numbers n sh*t. (The only hdd in the pc is a Western Digital...)

Can anyone help me out here? Where am I going wrong?

EDit: The drive shows up as "D:\[PLDS DG-16D4S 0225]" in the "Hitachi GDR3120" Tab.
 
Last edited:

Ceiman

Junior Member
Aug 23, 2017
10
0
SOLVED; Drivers for USBPro2 and CK3 hadnt installed properly: restarted with driver signature enforcement disabled, went into device manager and manually updated drivers from hdd, sorted now...