Drive not showing up in DOS

[neonblack]

ok i have another problem lol

I have an ms25 and im trying to dump fw so i boot using ntfs boot cd and it sticks at 1% and gives invalid opcode cannot continue then loads of numbers

That is what my problem was so i got told to create a 1gb ntfs partition so i did but now i cant get my new Drive to show up in ..................

There should be a Drive X in there but it's not . So how can i get it to show up ????????????

Thanks for any help again

 

[neonblack]

any info will help i am despret

 

[lang]

I'd say get a small bootable USB drive, you can get one for $10 - $15 that will work perfectly.

PS - This is your 3rd or 4th different thread on the same exact topic, in the future please reply to your existing thread.

 

[neonblack]

I'd say get a small bootable USB drive, you can get one for $10 - $15 that will work perfectly.

PS - This is your 3rd or 4th different thread on the same exact topic, in the future please reply to your existing thread.

my pc cant boot from USB and i dont have a floppy drive

+ this is the 2nd topic i have eva posted and they where diffrent questions but i will post in the same topic next time

thanks for the sujestion

 

[lang]

+ this is the 2nd topic i have eva posted and they where diffrent questions but i will post in the same topic next time

Umm no, this is the 3rd thread you've started for the exact same topic. You don't need a new thread every time you try something new, simply reply to your existing thread and say what you've tried or what's changed.

http://360mods.net/Forums/viewtopic/t=3094.html

http://360mods.net/Forums/viewtopic/t=3126.html

http://360mods.net/Forums/viewtopic/t=3158.html

my pc cant boot from USB and i dont have a floppy drive

I would try a different PC...one that supports USB booting or at the very least has a floppy drive.

 

[neonblack]

lol ok will remember that next time