Hi all, I have a very strange problem that I can't seem to rectify and searching hasn't really brought up anything, after hours I've still not been able to successfully flash LT3+ onto my liteon drive because it appears to fail exiting vendor mode, after I click liteon erase, it gives a successful code but when I try to outro it gets hard to explain, jungle flasher just says sending request, nothing after that and the drive becomes undetected, if I click lighton erase again on the port I know the drive is on, the drive appears again after getting the successful 0x72 code and says "in vendor mode!", but once again, I click outro, JF says sending request, pauses a few seconds then the drive disappears, as if the firmware has been messed up.
I have some experience in flashing as I successfully flashed a Hitachi in the past using JF but this liteon just won't stop bringing me problems.
The tools I've used are the CK3 Mini and Probe V3
Stupidly I don't have a JF log, as since the failed attempts I've at least managed to restore the drive to it's original self and DVD Key so it's as if It's never been messed with, I want to try and figure out what keeps going wrong before trying again as I am worried about really messing up and getting a completely unrecoverable drive, does anyone have any experience it what might be wrong? thank you
PS: I'm using this guide and have the latest dash: http://www.team-xecuter.com/forums/showthread.php?t=66257
I have some experience in flashing as I successfully flashed a Hitachi in the past using JF but this liteon just won't stop bringing me problems.
The tools I've used are the CK3 Mini and Probe V3
Stupidly I don't have a JF log, as since the failed attempts I've at least managed to restore the drive to it's original self and DVD Key so it's as if It's never been messed with, I want to try and figure out what keeps going wrong before trying again as I am worried about really messing up and getting a completely unrecoverable drive, does anyone have any experience it what might be wrong? thank you
PS: I'm using this guide and have the latest dash: http://www.team-xecuter.com/forums/showthread.php?t=66257
