Hello, i got a problem:
a friend of mine brought me an xbox, to change his hitachi drive spoofed as 74850 liteon for an original liteon.
I get the key only using "dump drive", cause it wouldnt do mode B. But it was dumped and looked good.
Then i opened JF, select target fw and copied the key. When I attach "new" liteon drive, it showed me it is an samsung (wtf) but i realised there is a game dvd in it, after manually opening the drive and removing dvd i closed it and attach to usbpro and ck3i. Drive showed in JF, but had sometimes problem with liteon erase, but finally i wrote the fw (74850 since it was 12625 dash). The key was not verified. I attached the drive to xbox and green light is flashing and drive still opening/closing...
i used all 74850fw´s in stock fw folder as long as LT+1.1 for that drive. Nothing changed
Later I realised that probably "mechanic part of the drive" is not "clicking down" after closing drive. I closed it manully with a little bit of power, it clicked but xbox instatle get 3rrod, fault 0001. After restart no rrod, but still opening/closing.
I realised to update fw (to 15574) which went good, but drive still flashing. I attached it to jf, it showed drive 0251, i probed it and get good dvd key (the same i wrote to fw few steps before). Then i flashed it with LT+3.0, put into xbox and... still that same fault.
The worst thing ist that "original" (hitachi spoofed as liteon) no longer works and makes the same thing that liteon (opening/closing).
Can it be wrongly extracted dvd key? How can i get it when it wont go into mode B? (its 78 hitachi)
Can the drive be dead? (but then, why hitachi does not work? can it be because of update?)
I´ve found somewhere that capacitors/resistors near dvd power cable on xbox motherboard could be faulty. (but what makes that? it worked before and i did nothing with them...)
I would be very happy for every help!
a friend of mine brought me an xbox, to change his hitachi drive spoofed as 74850 liteon for an original liteon.
I get the key only using "dump drive", cause it wouldnt do mode B. But it was dumped and looked good.
Then i opened JF, select target fw and copied the key. When I attach "new" liteon drive, it showed me it is an samsung (wtf) but i realised there is a game dvd in it, after manually opening the drive and removing dvd i closed it and attach to usbpro and ck3i. Drive showed in JF, but had sometimes problem with liteon erase, but finally i wrote the fw (74850 since it was 12625 dash). The key was not verified. I attached the drive to xbox and green light is flashing and drive still opening/closing...
i used all 74850fw´s in stock fw folder as long as LT+1.1 for that drive. Nothing changed
Later I realised that probably "mechanic part of the drive" is not "clicking down" after closing drive. I closed it manully with a little bit of power, it clicked but xbox instatle get 3rrod, fault 0001. After restart no rrod, but still opening/closing.
I realised to update fw (to 15574) which went good, but drive still flashing. I attached it to jf, it showed drive 0251, i probed it and get good dvd key (the same i wrote to fw few steps before). Then i flashed it with LT+3.0, put into xbox and... still that same fault.
The worst thing ist that "original" (hitachi spoofed as liteon) no longer works and makes the same thing that liteon (opening/closing).
Can it be wrongly extracted dvd key? How can i get it when it wont go into mode B? (its 78 hitachi)
Can the drive be dead? (but then, why hitachi does not work? can it be because of update?)
I´ve found somewhere that capacitors/resistors near dvd power cable on xbox motherboard could be faulty. (but what makes that? it worked before and i did nothing with them...)
I would be very happy for every help!
