Drive swap for update.

hallako

Noob Account
Oct 25, 2012
4
0
Can i just put liteon DG-16D2S drive from another xbox which is stock to the another lt3.0+ (also liteon DG-16D2S) for flashing procedure?
I am now on 14719 dash. I first update stock xbox to 16202 then swap and update the other?
Or just flash the another drive to stock and then after update back to lt3.0+?
 

crude

Full Member
Jul 1, 2011
65
0
Can i just put liteon DG-16D2S drive from another xbox which is stock to the another lt3.0+ (also liteon DG-16D2S) for flashing procedure?
I am now on 14719 dash. I first update stock xbox to 16202 then swap and update the other?
Or just flash the another drive to stock and then after update back to lt3.0+?
Why not just flash your current LT3 drive back to stock, update the dash then flash back to LT3?
 

hallako

Noob Account
Oct 25, 2012
4
0
It would be easier that way becouse i will flash the other drive eventually after updated the already flashed.
yeah i might just flash it to stock to be sure.
 

scott1503

VIP Member
Jul 21, 2012
1,794
88
Harrogate, North Yorkshire , uk
Can i just put liteon DG-16D2S drive from another xbox which is stock to the another lt3.0+ (also liteon DG-16D2S) for flashing procedure?
I am now on 14719 dash. I first update stock xbox to 16202 then swap and update the other?
Or just flash the another drive to stock and then after update back to lt3.0+?
The key for the xbox that you are updating would still need to be flashed to the drive so you may aswell flash the original back to stock update then reflash lt3
 

hallako

Noob Account
Oct 25, 2012
4
0
But now i have the stock drive and flashed drive liteon DG-16D2S and i dont have currently the ck3 pro to flash drive.
can i swap drives to update the flashed console to 16537 which i alredy updated the stock.
currently 14719 dash.
 

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
Unless the DVD keys are the same, it won't work.
 

scott1503

VIP Member
Jul 21, 2012
1,794
88
Harrogate, North Yorkshire , uk
No it will not get stuck.



As I wrote above.
you said it would be fine but as I said updating with the wrong DVD key on the drive will result in the console getting stuck in the update loop and it would kick up an error until the correct DVD key is on the drive