Hey guys got a bit of an issue. Ive soldered to and from nands and glitch chips several times and use a multimeter to ensure my connections are good. So i KNOW this is not my soldering that said the grouped wp we ale and cle points like i solder one or two and they work add the last wire ale or any other nothing. I try one it works add we or another it wont boot undo the connection bang boots. So they all work it boots fine but solder all 4 of them no boot there is no bridge nothing TRUST me im using flux, cleaning my tip, using .22 diameter solder. I only tin the tip a little so i know what im doin ya know its really pissing me off why this is happening. Any thoughts bad chip, is it supposed to do that till i can program it idk its a squirt 16Mb nand addon. Thanks guys.
RGH dual nand issue
- Thread starter x ModzGalore
- Start date
-
- Tags
- squirt nand 16mb
- Status
Cause at one point 3 of them worked and as soon as i added the Ale wire to nand pin 8 from left side No boot weird
Martin C
VIP Member
Well thats the thing i jus removed it for now cause its pissing me off the squirt bga v1.2 is in still and works fine i do those 4 i mentioned and nothing i also soldered the I/o 1 through 7 like 4 times looks like i wasnt even there so these 4 points are just f**ked excuse my language could it be the nand pins on the squirt nand maybe
Martin C
VIP Member
So you're not even asking for help on T-X products?
Read the rules.
Closed and infraction issued.
Read the rules.
Closed and infraction issued.
- Status