Dual Nand Not working when i put it back in the shell case

[junivelli]

Hi
I have installed a Dual nand(coolrunner Rev C+Demon) on my xbox slim (trinity)the xbox can boot on both dashboard(retail and Freeboot)eveything seems to work fine, however when i put the xbox motherboard back in the shell case, the console doesnt not work properly,
when i boot on freeboot, the console start but theres nothing on the screen and the Coolrunner greend led dont blink, when i start the xbox on the retail nand, it boots but the light on the xbox turn red and stay that way, however i can broswer throught the dashboard, then i decided to put some tape inside the shell case, nothing change it still the same, is anyone had this issue before ?

Pics:
CR : http://imageshack.us/photo/my-images/850/img20120917095427.jpg/
Demon :http://imageshack.us/f/27/img20120917095541.jpg/

 

[Blair7635]

Hi
I have installed a Dual nand(coolrunner Rev C+Demon) on my xbox slim (trinity)the xbox can boot on both dashboard(retail and Freeboot)eveything seems to work fine, however when i put the xbox motherboard back in the shell case, the console doesnt not work properly,
when i boot on freeboot, the console start but theres nothing on the screen and the Coolrunner greend led dont blink, when i start the xbox on the retail nand, it boots but the light on the xbox turn red and stay that way, however i can broswer throught the dashboard, then i decided to put some tape inside the shell case, nothing change it still the same, is anyone had this issue before ?

Pics:
CR : http://imageshack.us...0917095427.jpg/
Demon :http://imageshack.us...0917095541.jpg/

check the wiring on the bottom of the board. wiring may be loose and when it touchs the chassis it moves causing a loose connection

 

[junivelli]

I cleand up and re-solder my wires on the botton and it works on the case, however im still getting the solid red light, when the xbox boot on the retail nand, i can access the dashboard and even launch games, is there a way to fix that ?

 

[Goldensavage]

Can't get access to the pictures...

Just taking me to oops because they are not full links..

 

[Coleman]

Try this or this

 

[skytecbvmo]

do you have a multimeter to check out the points ????

 

[junivelli]

The links of the pics has been updated, sorry about that,
i dont have a multimeter :S i should get 1 soon,
i tried the move the FCC Cable, i work 2 times then i got the red dot back, and i notice that i cant sync my controller when im having the Red dot,and about the JP bridge, i think it was already opened by defautl ??

 

[BL4K3Y]

Post some close-up images of each point, especially those DemoN quick solder points.

By default, the JP bridge is a resistor - remove this if it is in place.

 

[junivelli]

i removed the Jp bridge and im still getting the Red dot on the Xbox and i cant sync my controllers, when im on the retail nand i have to jump to freeboot dashbord to be able to sync my controllers

here some update image and video
[ame="http://www.youtube.com/watch?v=JqaN47r6nb4&feature=player_embedded"]VID 20120918 040745 - YouTube[/ame]

http://imageshack.us/photo/my-images/4/img20120918031040.jpg/
http://imageshack.us/photo/my-images/4/img20120918031040.jpg/
http://imageshack.us/photo/my-images/62/img20120918032400.jpg/

 

[lio_x]

try to change the length of the CPU_RST cable
http://www.team-xecuter.com/forums/showthread.php?t=92668