GENERAL Dump nand corona V2

link79

Junior Member
Dec 16, 2012
10
0
Hello everybody,

Sorry for my english, i'm french :rolleyes2:

I have a CORONA V2 with dash in 2.0.15574.0.
I tried to read Nand.
I have by a
- Nand-X
- CR3 lite V1
- Xecuter Corona v2 4GB nand RW kit
I have not found a tutorial for explain to read nand with the all product i have.
For install CR3 lite i have consult many website and i have found how install CORONA 4GB nand RW, but not found how to use.
I'm sure that all tutorial exist but not found :(.
Thank you for your help
BR
Aurélien
 

righi

Full Member
Dec 16, 2011
32
0
hello

u'd also need the Xecuter DGX (labeled V1.0S) for that dash version

but, essencially, solder the RW kit to the mobo and run j-runner read nand button
 
Last edited:
  • Like
Reactions: link79

link79

Junior Member
Dec 16, 2012
10
0
Thanks for your reply :)
With the Xecuter DGX can i retrieve DVD key?
But for change DVD, i need this key :-(.
When i bought
Xecuter DGX can i install directly and dump or do i program as C3R lite?
I dont understand all that i read on different website about NANDX, C3R lite and NAND RW :-(.
Thanks for your answer :)
 

bruno_rv

VIP Member
Jun 8, 2010
181
0
Croatia
you need to:
-install 4gb nand qsb rw kit and read nand with jrunner
-install Dgx and read cpu key( you will get dvdkey also),after that REMOVE DGX
-now if you want to Rgh install cr3lite
 
Last edited:
  • Like
Reactions: link79

FlipMode

VIP Member
May 4, 2005
296
0
Woodstock, Ontario
I have not found a tutorial for explain to read nand with the all product i have.
For install CR3 lite i have consult many website and i have found how install CORONA 4GB nand RW, but not found how to use.
I'm sure that all tutorial exist but not found
Once you have the Corona 4Gb Nand RW installed download latest version of J-Runner.

In the J-Runner folder there is a J-Runner User guide.

Part way through the guide it will tell you how to read the Nand.

You will need a SD card reader plugged into a USB port and the Corona 4Gb Nand RW plugged into the SD adapter then into the USB reader. I would assume the switch on the Corona 4Gb Nand RW that plugs into the SD reader is set to R/W.

Then you click read Nand and follow the instructions.
 
  • Like
Reactions: link79

link79

Junior Member
Dec 16, 2012
10
0
Hi,

Thank you very much for your help and indication :)
Now i just found and buy the Xecuter DGX.
I think that i can found this on my favorite shop for this type of equipement :)
I say you the result when i make all opération.

Bye
 

link79

Junior Member
Dec 16, 2012
10
0
Hi,
i have receive my DGX 1.0S.
I have plugged on my CORONA 4GB and i have plugged the Corona 4Gb Nand RW and SD adapter on SD reader.
When i go to J-RUNNER and i click on READ nand he find the sd reader but he see 0mb .
Do i make something on the DGX before start dumping?
Thank you for your help.
 

BL4K3Y

VIP Member
Top Poster Of Month
Jul 7, 2010
13,224
118
At Home
Post some images of your install.

You should also try multiple SD card readers because not all of them will work.
 
  • Like
Reactions: link79

link79

Junior Member
Dec 16, 2012
10
0
hi,
I have not try another SD reader, but it s some photo on my install.

I have just a question on the state of switch.
I have read that for CORONA the 8 switch is on OFF.
But witch state for 1 to 7 switch?
I have leave on OFF state.

Thanks for your help :)



 

link79

Junior Member
Dec 16, 2012
10
0
Hi
i have shorten up CPU_RST and POST out but no change :-(
And i have try another SD Reader and It s good :).
I have read 2 times the nand, but how i do for extract the DVD key?

thanks.
 

link79

Junior Member
Dec 16, 2012
10
0
Ok :)
Log of jrunner :

===================================================
lundi 25 février 2013 23:08:44

J-Runner v0.2 Beta (287) Started



Checking Files
Finished Checking Files
E:\
Reading from E:\ to C:\J-Runner\V284\output\nanddump1.bin
Done!
in 0:03 min:sec
E:\
Reading from E:\ to C:\J-Runner\V284\output\nanddump2.bin
Done!
in 0:03 min:sec
Comparing...
Initializing nanddump1.bin..
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nand Initialization Finished
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same

And i have installed DGX V1.00S and CORONA 4GB QSB

That you want?
 

link79

Junior Member
Dec 16, 2012
10
0
Hi,
After some month, i have retry with another SD reader.
Now he see the 3500Mb but when i read the nand i have this message
Comparing...
Too Many Bad Blocks
Header is wrong..
I have try many SD reader but it s the same result :-(
I'm sorry for my method to abort this forum, but i think that that's more easy to make all step :-(
Thanks for your patience :)