JUNGLE FLASHER dvd key not found

[philmatt]

i have a lite on drive all ready flashed (not sure what LT ) I didn't do it i have ck3 probe and ck3 lite and x360 usb , when i connect everything up i can not get the dvd key ,it says not found !!! phatkey doesn't work .i follow the instructions but i can not get it to work ,all i want to do is update to LT2.0:eek2:

 

[knowlzy10]

what dash are you currently on, and which version of the probe are you using and which point on the pcb u probing,

have a quick read through this, depends which dash your on check your fw in jungleflasher

http://team-xecuter.com/forums/showthread.php?t=66257

 

[DrunkenNinja]

Are you using the probe to extract the key? If so which version, I never had a problem extracting the key and the guide truly is excelent, even for troubleshooting, just make sure you don't connect the probe while it is powered up cause you can screw up your board.

Another option is to get the guy that flashed the drive to send you a copy of the drive key, most modders keep a copy for safe keeping I know I always keep copies of the flashes I do.

 

[philmatt]

this is the guide i am using ,i have installed jf 1.89 ,i dont need porti0 32 because i have x360usb.... not sure what dash i have as i didn't flash it

 

[DrunkenNinja]

Talk us through exactly what happens, what buttons you press etc.

Is there no message when you connect the probe?
Are you sure your connecting it to the correct part of the board?
Is your drive detected in Jungleflasher?
Are you running Jungleflasher as Administrator?

 

[philmatt]

i press phatkey trun off probe turn on probe click yes turn off for 5 secs then turn on then phatkey failled

 

[knowlzy10]

i press phatkey trun off probe turn on probe click yes turn off for 5 secs then turn on then phatkey failled

can you post your jf log m8, what colours light on ck3 lite

 

[philmatt]

blue light

---------- Post added at 15:42 ---------- Previous post was at 15:40 ----------

maybe later when the kids have gone to bed .i will try or it will later in the week wenesday thursday during the day

 

[knowlzy10]

lights ok then mate are you using the probe 3 switch or turning ck3 lite off? is your drive definately showing up in jungleflasher, if you could post your log it might be helpful

 

[philmatt]

Having a go in few hours time when wife gets home kids in bed etc .. will post log if I can

 

[philmatt]

here is my log
JungleFlasher 0.1.84 Beta (250)
Session Started Mon Oct 17 18:22:56 2011

This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 1 Com Ports.
Found 4 windows drives A: C: D: F:
Found 2 CD/DVD drives D: F:

Drive is Lite-On..
Drive is Lite-On..
Sending iXtreme DVDkey request to port 0x0000

iXtreme DVDkey extraction failed!

Drive is Lite-On..
Sending iXtreme DVDkey request to port 0x0000

iXtreme DVDkey extraction failed!

Drive is Lite-On..
Drive is Lite-On..
Drive is Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
........................................................................
Device Intro failed!

PhatKey extraction failed!


No Drive Detected! DVDkey files extraction aborted!

Drive is Lite-On..
Drive is Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
........................................................................
Device Intro failed!

PhatKey extraction failed!

Drive is Lite-On..
Drive is Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
........................................................................
Device Intro failed!

PhatKey extraction failed!

Drive is Lite-On..
Drive is Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
...................
Serial flash found with Status 0x52

Extracted drive key failed Verification !


PhatKey extraction failed



where am i going wrong !!!!

 

[Fisticuffs]

First get the latest jf from their site to start with and read the tutorial again, Second, What liteon drive is it?, And has it been flashed with CFW before?

 

[wkdsean]

this works for me 100% of the time
have ck3 on
press phatkey, yes
probe button in , connect probe, release button
extract complete, remove probe
ck3 power off, ck3 power on
press ok
done

 

[philmatt]

8 series .has been flashed about 3 month ago not sure what though what is cfw

 

[wkdsean]

just do what i have done. follow the guide upto the point it tells you to use the probe then do exactly what i said above, it never fails.

 

[Fisticuffs]

If you already have your drive key then you don't have to redump the drive, What exactly are you trying to do, Return the drive to stock for a system update?, Update to the latest CrackedFirmWare?, If you have the key and know its right then you can spoof your dummy.bin to stock Fw or CFw in the firmware 32 tab and hit liteon erase to write, Also what dash is your 360 on?

 

[philmatt]

When you say button do u mean the switch on the power cable between ck3 lite and drive.I don't have that on ck3 lite

 

[knowlzy10]

When you say button do u mean the switch on the power cable between ck3 lite and drive.I don't have that on ck3 lite

if your using probe 3 mate theres a switch on the cable to power off, if your not using probe 3 thats why phatkey is failing

 

[philmatt]

My boy updated to newest dash16403 I think ....it stills play backups .I want to put new Lt 2.0 so o can play newer games

---------- Post added at 19:37 ---------- Previous post was at 19:35 ----------

No switch on my probe 3

---------- Post added at 19:38 ---------- Previous post was at 19:37 ----------

I do not have the key

 

[wkdsean]

the button that powers the probe the white one is what i mean