JUNGLE FLASHER dvd key not found
- Thread starter philmatt
- Start date
I have x360usb ck3 lite and probe 3
---------- Post added at 20:18 ---------- Previous post was at 20:15 ----------
My lead doesn't have a switch
---------- Post added at 20:18 ---------- Previous post was at 20:15 ----------
My lead doesn't have a switch
The probe just has the 2 wires that connect in the power wire between ck3 lite and drive no switch like some videos I have watched .should I put a switch on the probe or go for a Lt switch 2.0
DrunkenNinja
VIP Member
Does the probe 3 look like this?
If it does the power button we are referring to is the little white part on the wire, it has a spring underneath it :smile: this button should be used when instructed to power on and off the drive during key extraction.
If it does the power button we are referring to is the little white part on the wire, it has a spring underneath it :smile: this button should be used when instructed to power on and off the drive during key extraction.
sounds like the OP has an old probe - you can mod by installing a switch on the 3.3v line or u can just get a probe 3 - can u post a pic of your probe?
i am a bloody fool ,, i think i have ordered the wrong probe i have the
SPUTNIK360 - Liteon DG-16D4S DVD Unlock Probe and not one for 16d2s
SPUTNIK360 - Liteon DG-16D4S DVD Unlock Probe and not one for 16d2s
knowlzy10
BANNED
that would explain the no switch and phat key fail m8,
not sure what the procedure will be for a wrong order,
best contacting a member of admin see what they say
oh well just ordering the the right one now ,,many thanks to all those that have help me come to the fact that i am a fool , check order next time
knowlzy10
BANNED
no probs m8, if it cant go back because u tried it could always sell it on here in the traders section mate, might lose a couple of quid off what u paid but better than nothing
DrunkenNinja
VIP Member
You should be good to go once you get a Probe, glad we solved your problem, on the plus side you probably know the procedure with your eyes closed by now.
Many thanks
---------- Post added at 14:23 ---------- Previous post was at 14:21 ----------
It was only a tenner
---------- Post added at 14:23 ---------- Previous post was at 14:21 ----------
It was only a tenner
received probe III in post extracted key first time can you point me to how i can flash back to stock ,because i pluged in kinect and it wanted to update ,many thanks
x360ccm
BANNED
load your dummy as source click no to auto load lt plus,then load the stock for your drive
if you on a dash higher than 13141 then load orig-02510C-1c000 from the liteon post 13141 folder.
and then click spoof source to target,then write to your drive.
if you on a dash higher than 13141 then load orig-02510C-1c000 from the liteon post 13141 folder.
and then click spoof source to target,then write to your drive.
Last edited:
many thanks for all your help (you know who you r),i have done it now all works fine ,dash16403 with kinect running LT plus 2.0 ,all runs fine ,can't thank you enough, cheers
knowlzy10
BANNED
glad u got it sorted m8, id sell the other probe unless ur planning to purchase a slim:rolleyes2: