LITEON DG-16D2S DVD-Key "Not Verified"

[Pastori90]

Hey!

I just got my TX Probe 3 and tried to flash my LiteOn DG-16D2S drive.
When I start JungleFlasher it says that some error has happened.

Here's a photo:

JungleFlasher Error

After that, when I go to DVD Key 32, it says "DVD Key: Not Found"

Here's a photo:

LiteOn DG-16D2S

My LiteOn has been flashed before but not by me.
I sent it to some company that flashed drives before.

Is there a fix for my problem?

 

[Utmad]

The first error, in jungle flasher just tick usb only as you do not need port io

Have you probed the drive to get your key yet

 

[Pastori90]

The first error, in jungle flasher just tick usb only as you do not need port io

Have you probed the drive to get your key yet

Yeah, I got the first error fixed.

I tried to probe it but when I do I says "PhatKey Failed"

I used that video as tutorial: [ame="http://www.youtube.com/watch?v=qvhRW2wsLoE"]How to Flash Any (Phat) LiteOn Xbox 360 DVD Drive with LT+ 3.0 - YouTube[/ame]

 

[talby71]

well the key isn't going to verify if you haven't got it yet

here's the basic steps for getting your key

CK3 power on

on JF on DVDKey 32 tab

press Phatkey, press Yes

probe switch off (hold button in)(led off)

probe MPX01 point (hold it there)

probe switch on (let go of button)(led on)

extract complete pops up

remove probe from MPX01 point

probe switch off (ck3 power off or hold probe button in ) for approx 5 secs

power back on ,(release probe button)

press ok

all done

any problems , you haven't done it properly

 

[Utmad]

Yeah, I got the first error fixed.

I tried to probe it but when I do I says "PhatKey Failed"

I used that video as tutorial: How to Flash Any (Phat) LiteOn Xbox 360 DVD Drive with LT+ 3.0 - YouTube

Just follow the jungle flasher instructions, it works perfectly if you follow.

 

[Pastori90]

well the key isn't going to verify if you haven't got it yet

here's the basic steps for getting your key

CK3 power on

on JF on DVDKey 32 tab

press Phatkey, press Yes

probe switch off (hold button in)(led off)

probe MPX01 point (hold it there)

probe switch on (let go of button)(led on)

extract complete pops up

remove probe from MPX01 point

probe switch off (ck3 power off or hold probe button in ) for approx 5 secs

power back on ,(release probe button)

press ok

all done

any problems , you haven't done it properly

When I remove probe from MPX01 point after "Extract complete" and start to press Probe button again, it says "PhatKey Failed"

Do I press the probe button "Off" while removing probe from MPX01
or
Do I first "remove the probe from the point" and after that "press probe button 5 secs" ?

 

[Antalpromille]

When you get the extraction complete message, press the button 5 sec and THEN press ok on the message. You should NOT press ok and then press the button 5 sec

 

[Pastori90]

When you get the extraction complete message, press the button 5 sec and THEN press ok on the message. You should NOT press ok and then press the button 5 sec

YES !!!!!
THANK YOU !
Finally it worked !

 

[Antalpromille]

No problem, just happy to help!

 

[CarpeDiem]

So it is know here, the "hold for 5 seconds" thing was to discharge the capacitor in the original PMT style. The cap-less PMT style does not require this. The JF tutorial makes this clear. Here's what works best, for me at least (and I've done a LOT):

Hit Phatkey
hit yes
probe mpx01
press and release cable button quick (about 1 second)
get x52
remove probe from mpx01
press and release cable button quick (about 1 second)
hit OK
save your dummy.bin (and other files if you don't have "dummy.bin only" checked