BENQ DVD Swap need help!!

[Haaris]

 

[GeekHeat]

I just asked u to identify your motherboard with the link I sent u to this PIC. I don't know how posting this PIC is going to let us know what motherboard u have.

 

[hangin1]

I didn't post that pic but I will take a look and let you know and thanks again for all the help, I realize the firmware I was using is outdated but that is because that is the firmware that was on the key that I found after screwing up my original drive so I know its an old version of the key but it was the only one I had available and then I tried to flash it back to stock using the stock bin provided and spoofing the key to it from that.

 

[hangin1]

OK well after taking a look at the link you sent me and the picture that Haaris posted the power plug does indicate a Jasper drive as I suspected.

 

[hangin1]

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.96 Beta (323)
Session Started Sun Apr 06 20:59:53 2014

This is a Wow 64 process running on 2 x 64 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 0 Com Ports.
Found 5 windows drives C: D: E: F: G:
Found 2 CD/DVD drives D: F:

portio64.sys Driver not Installed
Drive is Benq..
Drive is Benq..
Drive is Benq..

Sending Magic Keys to Drive on port 0x0000
.................................................
Done!
Sending Vendor Intro
Requesting Device ID
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0x0000
Serial flash found with Status 0x73

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Dumped in 9404mS

Benq Dump file saved to BENQ1-OFW.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xA030 A8689D9C709A21CC1DFF53FB8FD4F27C
Firmware Osig: [PBDS VAD6038-64930C ]
Firmware is: Stock
Key added to database


Loading MTK_Flash source file
Loading firmware file C:\Users\hollysue\Downloads\iXtreme_LT+3.0_(Slim)-XBOX360+JungleFlasher.0.1.92.Beta(304)\Firmware\LTPlus-0442-v3.0.bin
MD5 hash: 8784e0f4ce27941a2a3293c8a5ac85e4
Genuine LT plus v3.0
Inquiry string found
Identify string found
Drive key @ 0xA020 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PBDS VAD6038 0442]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches


Getting Status from port 0x0000
SPi flash found with Status 0x73

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0x0000
Drive is Benq..

 

[Hyperion2014]

Maybe its Falcon ,, LOL how Noes,,

 

[hangin1]

Yea either way I realize the biggest problem here is I am not even sure I am using the correct key and the only way to be sure is to extract it from the nand correct? Well if that is the case I guess I will simply have to figure out a way to extract it but one more quick question if the key is wrong would it cause it to not play games and send me back to the dashboard everytime I try and start a game regardless if I am trying to play the game online or not?

 

[ezzda1]

With xgd3 games yes it will.
I think earlier games xgd2 should play the 'put this disk into an xbox 360' video.