DVDKey extract problem

[johney]

Hi guys, I'm having this weird error..I'm trying to extract my key on my 02510c..
After I get the "Serial flash found with Status 0x52" and remove the probe (just like in the tutorial), switch 3.3v OFF, and then when I try to switch 3.3v ON my pc reboots.
It also happens when I turn my drive on while the pc is running, but if I boot with the drive already powered, windows starts normally.
Any ideas?

 

[hersheys247]

Post a jf log if you can

Sent from my brain tumor causing device using Tapatalk

 

[jrjr6565]

Also is your drive hooked up via USB Pro or your PC's onboard sata?

 

[legitmod]

you probably have a short some where you need to look over your pc an hardware wiring

 

[X4life3]

How is the power getting to the drive? And how is the sata hooked up to the computer?

 

[talby71]

hmm weird, asks a question then disappears

 

[johney]

Sorry I wasn't expecting replies so quickly ..I was sleeping..Anyway,
I can't post a jf log because the pc crashes,
The drive is hooked up via onbord sata,
Where do I look for the short?
I'm using blaster ck3 if that answers your question

 

[Miknow]

Power supply issue maybe? I had a similar problem with a dvd drive.

Can you try on another computer?

 

[johney]

Power supply issue maybe? I had a similar problem with a dvd drive.

Can you try on another computer?

Maybe, but the power supply is 1 year old..
No other computer to try it on though..

 

[johney]

Well, my problem is somehow fixed. I've tried cleaning my motherboard in case of a short by some wires, I've replaced my SATA cable and now it works..
Thanks for the ideas!