E64 screen error

[chubert133]

hello, i have a phat xbox360 initially liteon 83850C which i modded to LTPlus-838v1.1 then after update 13146 my drive is now a 02510 which i modded to LTPlus-025v1.9. well, lately i erased my fw unintentionally while trying to update to LTPlus-0251-v3.0. i have read somewhere that we always need to flash to original firmware before flashing to LT (LTPlus-025v1.9 to LTPlus-0251-v3.0) somefing which i read after i screwed up. i still have the dummy.bin, the key.bin, lite_cfw.bin and ix-ltv1.1-838.bin for the very first flash (83850C). i'm having e 64 screen error.

i hooked up my liteon drive to my laptop and i'm using the xbox360 itself as power source. jungle flasher cannot detect my drive! says no drive detected!

device: intel(R) Mobile Express Chipset SATA AHCI Controller.

JungleFlasher 0.1.92 Beta (304)
Session Started Thu Nov 22 16:01:11 2012

This is a Wow 64 process running on 4 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 2 I/O Ports.
Found 18 Com Ports.
Found 4 windows drives C: D: E: F:

CAN ANYONE HELP ME PLEASE?

 

[ReMix]

Load dummy as source 0251 fw as target, spoof to target, write

In the case of a spelling error, I blame Tapatalk.

 

[chubert133]

how do i write if jungle flasher says no drive detected?? i screwed up. i didn't plug the power plug the right way around to the dvd drive due to lack of concentration and i saw smoke coming from the drive when i powered the xbox360 on (i'm using the xbox360 itself as power source). damn it. i opened the drive, the R204 and the R207 are burned out on the module. i have a spare virgin liteon drive but unfortunately it's a 74850C. Dumping it to extract its key will be of no use as my dashboard(13146) won't recognize it. i have the dummy.bin, the key.bin of my previous out of use liteon(0251). will it be possible for me to load dummy as source, [stock 74850C or stock 02510] as target, spoof to target, erase and write? which one shall i use as target?? i dn't fink stock 74850C will be the proper fw as after 13146 update all phat liteon should be stock 02510 fw, i just want to be certain before i screwed this one too! will it work just fine? or will have an E66 error this time? Assuming that my dashboard (13146) recognizes the drive, at this stage my drive is still a stock version. will i be able to update my dashboard at least to 15574 then flash LT+3.0? i understand that the steps are pretty sequential and it all depends if my dashboard recognizes the new liteon after spoofing the key. CAN ANYONE PLEASE HELP ME BY SHEDDING LIGHT ON THIS MYTHE? THANKS in advance.

 

[IronDre]

first of all all phat lite on fw ver are 02510C fw after dashboard 13141. secondly with "virgin" lite on drive you have all you need to do is update the fw to stock 02510C there is no need to dump anythin from that drive unless its to another system. connect the replacement lite on load the stock 02510C fw that came with LT+ fw in target firmware then go to manual spoofing load your key from ur orginal lite on drive and write it and you should be good to go.