Team-Xecuter Community
Error: E79 Secondary:1033
I was using J-Runner v0.2 Beta (287) to jtag my Falcon xbox. I checked if it was Jtaggable and it is. This is my 3rd time resoldering these wires. I get bad blocks each time i read the nand but based off what I read at other places J-Runner remappes them... not sure what that means but they make it seem like it "fixes" the bad blocks.
===================================================
Wednesday, February 20, 2013 11:51:53 PM
J-Runner v0.2 Beta (287) Started
current dashlaunch 3.06 does not work with 16203
Filechecks disabled - No Filechecks carried out
Version: 03
Flash Config: 0x01198010
CB Version: 5770
Falcon/Opus
Reading Nand to C:\Xbox 360 iso's\J-Runner v02 Beta (280) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 3DA
Error: 250 reading block 3DB
Done!
in 2:10 min:sec
Reading Nand to C:\Xbox 360 iso's\J-Runner v02 Beta (280) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Reading Nand
Nand Initialization Finished
Error: 250 reading block 3DA
Error: 250 reading block 3DB
Done!
in 2:10 min:sec
Comparing...
Bad Block ID @ 0x03DA [Offset: 0xFE3400]
Bad Block ID @ 0x03DB [Offset: 0xFE7600]
Bad Block ID 03DB Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 03DA Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 03DA [Offset: 0xFE3400]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 03DB [Offset: 0xFE7600]
Bad Blocks Remapped
Bad Block ID @ 0x03DA [Offset: 0xFE3400]
Bad Block ID @ 0x03DB [Offset: 0xFE7600]
Bad Block ID 03DB Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 03DA Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 03DA [Offset: 0xFE3400]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 03DB [Offset: 0xFE7600]
Bad Blocks Remapped
Nands are the same
XeLL file created Successfully falcon.bin
Version: 03
Flash Config: 0x01198010
Writing Nand
falcon.bin
Done!
in 0:10 min:sec
===================================================
Here is my soldering
^
The orange wire looks like its touching the yellow one but its not.
What do i need to do? Anything is better than nothing.
I was using J-Runner v0.2 Beta (287) to jtag my Falcon xbox. I checked if it was Jtaggable and it is. This is my 3rd time resoldering these wires. I get bad blocks each time i read the nand but based off what I read at other places J-Runner remappes them... not sure what that means but they make it seem like it "fixes" the bad blocks.
===================================================
Wednesday, February 20, 2013 11:51:53 PM
J-Runner v0.2 Beta (287) Started
current dashlaunch 3.06 does not work with 16203
Filechecks disabled - No Filechecks carried out
Version: 03
Flash Config: 0x01198010
CB Version: 5770
Falcon/Opus
Reading Nand to C:\Xbox 360 iso's\J-Runner v02 Beta (280) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 3DA
Error: 250 reading block 3DB
Done!
in 2:10 min:sec
Reading Nand to C:\Xbox 360 iso's\J-Runner v02 Beta (280) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Reading Nand
Nand Initialization Finished
Error: 250 reading block 3DA
Error: 250 reading block 3DB
Done!
in 2:10 min:sec
Comparing...
Bad Block ID @ 0x03DA [Offset: 0xFE3400]
Bad Block ID @ 0x03DB [Offset: 0xFE7600]
Bad Block ID 03DB Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 03DA Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 03DA [Offset: 0xFE3400]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 03DB [Offset: 0xFE7600]
Bad Blocks Remapped
Bad Block ID @ 0x03DA [Offset: 0xFE3400]
Bad Block ID @ 0x03DB [Offset: 0xFE7600]
Bad Block ID 03DB Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 03DA Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 03DA [Offset: 0xFE3400]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 03DB [Offset: 0xFE7600]
Bad Blocks Remapped
Nands are the same
XeLL file created Successfully falcon.bin
Version: 03
Flash Config: 0x01198010
Writing Nand
falcon.bin
Done!
in 0:10 min:sec
===================================================
Here is my soldering
^
The orange wire looks like its touching the yellow one but its not.
What do i need to do? Anything is better than nothing.