JTAG E79 no matter which method i use

[xboxmoddz]

i received a falcon that had the maximus installed i believe on the bottom of the board, which had 0022

i put a new GPU on which fixed it, and i flashed the original nand that was sent to me, it works fine this way

i tried the boxxdr method which i always use and i get e79 using aud clamp xell, i tried original for giggles and still nothing

i redid the boxxdr method using fresh components same error

i did the regular wiring on the top of the board and flashed xell and i still get e79

i have no idea why this is doing this

 

[WNYConsoles]

I have had this a ton of times with early/mid 2007 Falcons. I always start with the transistor method hoping it will take, then end up doing the original DB1F1 and ROL which always seems to take, might want to give that a try.

But, instead of the ROL wire, solder the wire to the bottom of the board and not on the RF unit.

Hope this helped

 

[Martin C]

Maybe post a pic of your soldering?

 

[spandaman]

Sounds like a picture of the soldering is needed, have come across this a few times due to ppl's bad soldering.