E79 or Christmas Tree Error

modmonster

VIP Member
Nov 7, 2009
4,640
0
Cheshire, UK
xboxmods.wordpress.com
Re: 2 red lights and 2 green lights?

What are you using to jtag it?
Have you used the nand-x wiring or jtag wires?
Check your diodes are facing the right way.
 

jorgesalas831

VIP Member
Aug 2, 2010
245
0
California
you should post some pics of your soldering....did you add your jumper...and if so , ara you bridging the right ones?..
 

jorgesalas831

VIP Member
Aug 2, 2010
245
0
California
then was was your problem that you had??
 

tony1160

VIP Member
Aug 7, 2004
432
0
uk
if your that good :rolleyes: whats the E79 error about as its 99% bad solderin,an after all your asking for help
 
Jun 4, 2010
3,080
0
With the donor NAND which KV are you using original board KV or a different one? I somehow suspect that the KV is the cause of this here!!!!
 

Xmods

VIP Member
Dec 9, 2002
1,431
0
can you give some details about the console it self you bought it used got it from a friend little history of the box
 

lil BLu3 SMuRF

VIP Member
Jul 20, 2010
399
0
Louisiana, USA
can you give some details about the console it self you bought it used got it from a friend little history of the box
ok, i did a trade for a broken xenon for a zephyr. and a lil bit of cash... so, he said it gets boots the xbox logo for 2 seconds, then gets 1 red light with an error code of 1033. when i got it, i looked at it and tried it. rrod. i tried Xellous, worked perfectly. no rrod. so i then dumped the nand, and it was a 9199 dash (freeBOOT). ok so i decided to use a donor nand and flash the KV and config in to it, didnt work, i got no video/audio/1 green light lit. so i decided to do this: http://www.xboxhacker.org/index.php?topic=15694.0

i sed the xenon. and i did all the stuff, and got green lights on the top, and red lights on the bottom, and they switched back and forth. thats it.
 

Xmods

VIP Member
Dec 9, 2002
1,431
0
ok can you open the freeboot 9199 image with the boxs cpu key that you get from booting xell in flash 360? without it saying bad kv
 

lil BLu3 SMuRF

VIP Member
Jul 20, 2010
399
0
Louisiana, USA
can you say what you did to fix this as it may help other users in the future.
now u must think, well y didnt u try this before. all i did was inject the KV and config from the rrod nand (bad nand) into an XBR nand. and it worked, now i just made freeboot with XBR to freeboot by JJMPS. i will post back my results