RGH Error 0022,after I tried cap

[n_s_a]

Hello

I've tried glitch my Xbox Jasper 16mb,w/ coolrunner,and I solder the wires,boot xell,after 1/2/3 minutes.

I tried put a capacitor(220pf) between A and GND,and don't boot xell and coolrunner not blink.I removed the cap,but don't boot xell more...

So...i returned the stock nand,and receive the 0022 error,in every 8 secs.

I don't know if is the ldv,but,the xell don't boot anymore...

Oh,and I removed the resistor(10k) near A point,because I measure it,and it only 100ohms...and I put another 10k resistor...but 0022 continue.

I will take pics for you!

Thx everbody!!

 

[Dark_Riku]

You should always take pictures as a standard anyway if you need help. It's even integrated into the rules now...so hard to miss.

 

[Loomingx]

Check for bridged points. No one can help you if you don't post pictures.

 

[n_s_a]

Yes,sorry no post pics now,I will take pics!!

Here...sorry the quality =/

 

[Urban Gamer]

POST PICTURES!!!!

 

[Dark_Riku]

Any chance you can take a closer image of the points? and make sure ALL of the points have images taken so we can assist you better.

 

[n_s_a]

Hum,sure,this pics don't help much :facepalm:

I will try take better pics for you

Thx a lot!!