Error 13 again and still

[akaez]

I installed a x2.6 ce on a v1.3(or 1.2?), flashed with x2 4983 (1mb). After the install my xbox worked with the chip on or off.

Once I added the evox.ini
default.xbe (renamed to xboxdash.xbe)
renamed xboxdash.xbe to msxboxdash.xbe
and added my skins folder I got an error 13.

I put everything back to its original state and no more error 13 with the chip on or off.

Now I don''t have these files (evox.ini, default.xbe, or skins folder) on the xbox.

Not sure what I did wrong, if any one can see what I missed please let me know.

Thanks in advance for any help.

 

[Fantmx]

First off, get 5032, and flash that using FlashX. Flash it to bank 1. Then, setup your ini file to read evoxdash.xbe from the drive of your choice. Then install everything how you did before. You do not have to rename any files anymore.

 

[akaez]

I'll try it today and post the results

 

[akaez]

Thanks Fantmx

First off, get 5032, and flash that using FlashX. Flash it to bank 1. Then, setup your ini file to read evoxdash.xbe from the drive of your choice. Then install everything how you did before. You do not have to rename any files anymore.

Did alittle more reading and followed your step.

Problem solved

Thanks again

 

[bigpoppafurious]

SAME PROBLEM WITH A VERSION 1.1 I THINK....
ERROR 13, ALSO STRANGE UNLOCK ERROR FOR HDD IN EVOX SETTINGS???
ANY IDEAS??

 

[Fantmx]

Try the same solution. What is the unlock error? Does your drive support locking? http://xboxdrives.x-pec.com/?p=list