GENERAL error 3151 - 335a - b800 - 0403 - c000 - 0058

[LEENO]

dvd firmware not updated to pre-firmware,
inserted fifa11, started update and gived error
3151 - 335a - b800 - 0403 - c000 - 0058

Now i flashed dvd with orig-74850C-1a000, copied dash 13146 on pendrive, but always same error.

How solve?

 

[axee44]

flash your drive with 02510c firmware and try again.

 

[Kevin26]

Flash back to 02510C stock firmware and update again like axee44 said with 13146 update using CD or Pen Drive!!!!!!!

 

[BL4K3Y]

flash your drive with 02510c firmware and try again.

This is correct, flash your drive with 0251 stock firmware (found in the POST 13xxx folder) and then try updating .

 

[LEENO]

thankyou brothers, but i flashed orig-02510C-1c000, inserted pendrive with 13146, poweredon and still same error

 

[BL4K3Y]

Try inserting your original FIFA '11 disc after flashing the drive to 0251 stock firmware.

If everything went well, the update should continue.

 

[LEENO]

Try inserting your original FIFA '11 disc after flashing the drive to 0251 stock firmware.

If everything went well, the update should continue.

i tryed with no luck

 

[BL4K3Y]

Did you use your retail disc?

 

[LEENO]

original is damaged, i tryed with lt3.0 and fifa11 backup

 

[axee44]

thankyou brothers, but i flashed orig-02510C-1c000, inserted pendrive with 13146, poweredon and still same error

Is your pendrive formatted to FAT32 and is there ONLY $systemupdate on it and no other files??

 

[LEENO]

there is any way to flash working nand 12625? If i found 12625 working dump and i insert my cpukey, it will work?

---------- Post added at 18:02 ---------- Previous post was at 18:01 ----------

Is your pendrive formatted to FAT32 and is there ONLY $systemupdate on it and no other files??

yes, it is working in other xbox

 

[axee44]

i wouldn't advise messing with NAND just yet.
Can you confirm this xbox always had lite-on drive??
Could you post your jungle flasher log??

 

[LEENO]

i wouldn't advise messing with NAND just yet.
Can you confirm this xbox always had lite-on drive??
Could you post your jungle flasher log??

i not know but 360flashtool report 16d2s from nand backup

JungleFlasher 0.1.92 Beta (304)

Session Started Mon Mar 05 18:15:08 2012



This is a 32 bit process running on 2 x 32 bit CPUs 

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed 

portio32.sys Driver Started, thanks Schtrom ! 

Found 7 I/O Ports.

Found 2 Com Ports.

Found 8 windows drives C: D: E: F: G: J: L: T:

Found 1 CD/DVD drives F:



Loading firmware file L:\CEL\XBOX 360\LITEON 251 0272\JungleFlasher\Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin

MD5 hash:  e7e0f802769fd80329784ca4b512f1a9

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS    DG-16D2S        0251]

Firmware is:  Stock                           

Loading firmware file D:\BACK\Desktop\DL FAT\Dummy.bin

MD5 hash:  b0730fc15172776c196fd19c3844754a

Inquiry string found

Identify string found

Drive key @ 0xA030 D2C18BFD5335032278E32C1577275E92

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  PhatKey Extract                 

Auto-Loading firmware file L:\CEL\XBOX 360\LITEON 251 0272\JungleFlasher\firmware\LTPlus-748v1.1.bin

MD5 hash:  53786fac70e9c6b895b2e99144c7fb6d

Genuine LT plus v1.1

Drive key @ n/a 77777777777777777777777777777777

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  LT-Plus 1.1                     

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target

Serial data copied from Source to Target





Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x90

....................

Device Intro failed!

Sending Vendor Intro to port 0x0000

Status 0x90

Re-sending Vendor Intro: 

........

Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name:  MXIC(MX25L2005)

Flash Size:  262144 bytes



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !

---------- Post added at 18:27 ---------- Previous post was at 18:22 ----------

now i tryed to spoof dummy to new dvd drive benq, but still same error

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.92 Beta (304)

Session Started Mon Mar 05 18:18:56 2012



This is a 32 bit process running on 2 x 32 bit CPUs 

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed 

portio32.sys Driver Started, thanks Schtrom ! 

Found 7 I/O Ports.

Found 2 Com Ports.

Found 7 windows drives C: D: E: F: G: L: T:

Found 1 CD/DVD drives F:



Drive is Benq.. 

Drive is Benq.. 



Sending Magic Keys to Drive on port 0x0000

.................................................

Done!

Sending Vendor Intro

Requesting Device ID

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name:  MXIC(MX25L2005)

Flash Size:  262144 bytes

Loading firmware file D:\BACK\Desktop\DL FAT\Dummy.bin

MD5 hash:  b0730fc15172776c196fd19c3844754a

Inquiry string found

Identify string found

Drive key @ 0xA030 D2C18BFD5335032278E32C1577275E92

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  PhatKey Extract                 

Auto-Loading firmware file L:\CEL\XBOX 360\LITEON 251 0272\JungleFlasher\firmware\LTPlus-748v1.1.bin

MD5 hash:  53786fac70e9c6b895b2e99144c7fb6d

Genuine LT plus v1.1

Drive key @ n/a 77777777777777777777777777777777

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  LT-Plus 1.1                     

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target

Serial data copied from Source to Target



Loading firmware file L:\CEL\XBOX 360\LITEON 251 0272\JungleFlasher\Stock firmware\BenQ\BenQ_Post_13141\orig-04421C-A020.bin

MD5 hash:  c06824efcf0ca07dc785a5eb73455258

Inquiry string found

Identify string found

Drive key @ 0xA020 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PBDS    VAD6038         0442]

Firmware is:  Stock                           

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target





Getting Status from port 0x0000

SPi flash found with Status 0x73



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !

 

[axee44]

i not know but 360flashtool report 16d2s from nand backup

JungleFlasher 0.1.92 Beta (304)

Session Started Mon Mar 05 18:15:08 2012



This is a 32 bit process running on 2 x 32 bit CPUs 

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed 

portio32.sys Driver Started, thanks Schtrom ! 

Found 7 I/O Ports.

Found 2 Com Ports.

Found 8 windows drives C: D: E: F: G: J: L: T:

Found 1 CD/DVD drives F:



Loading firmware file L:\CEL\XBOX 360\LITEON 251 0272\JungleFlasher\Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin

MD5 hash:  e7e0f802769fd80329784ca4b512f1a9

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS    DG-16D2S        0251]

Firmware is:  Stock                           

Loading firmware file D:\BACK\Desktop\DL FAT\Dummy.bin

MD5 hash:  b0730fc15172776c196fd19c3844754a

Inquiry string found

Identify string found

Drive key @ 0xA030 D2C18BFD5335032278E32C1577275E92

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  PhatKey Extract                 

[B][COLOR=Red]Auto-Loading firmware file L:\CEL\XBOX 360\LITEON 251 0272\JungleFlasher\firmware\LTPlus-748v1.1.bin

MD5 hash:  53786fac70e9c6b895b2e99144c7fb6d[/COLOR] [COLOR=Red]

Genuine LT plus v1.1[/COLOR] [/B]

Drive key @ n/a 77777777777777777777777777777777

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  LT-Plus 1.1                     

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target

Serial data copied from Source to Target





Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x90

....................

Device Intro failed!

Sending Vendor Intro to port 0x0000

Status 0x90

Re-sending Vendor Intro: 

........

Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name:  MXIC(MX25L2005)

Flash Size:  262144 bytes



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !

---------- Post added at 18:27 ---------- Previous post was at 18:22 ----------

now i tryed to spoof dummy to new dvd drive benq, but still same error

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.92 Beta (304)

Session Started Mon Mar 05 18:18:56 2012



This is a 32 bit process running on 2 x 32 bit CPUs 

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed 

portio32.sys Driver Started, thanks Schtrom ! 

Found 7 I/O Ports.

Found 2 Com Ports.

Found 7 windows drives C: D: E: F: G: L: T:

Found 1 CD/DVD drives F:



Drive is Benq.. 

Drive is Benq.. 



Sending Magic Keys to Drive on port 0x0000

.................................................

Done!

Sending Vendor Intro

Requesting Device ID

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name:  MXIC(MX25L2005)

Flash Size:  262144 bytes

Loading firmware file D:\BACK\Desktop\DL FAT\Dummy.bin

MD5 hash:  b0730fc15172776c196fd19c3844754a

Inquiry string found

Identify string found

Drive key @ 0xA030 D2C18BFD5335032278E32C1577275E92

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  PhatKey Extract                 

Auto-Loading firmware file L:\CEL\XBOX 360\LITEON 251 0272\JungleFlasher\firmware\LTPlus-748v1.1.bin

MD5 hash:  53786fac70e9c6b895b2e99144c7fb6d

Genuine LT plus v1.1

Drive key @ n/a 77777777777777777777777777777777

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  LT-Plus 1.1                     

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target

Serial data copied from Source to Target



Loading firmware file L:\CEL\XBOX 360\LITEON 251 0272\JungleFlasher\Stock firmware\BenQ\BenQ_Post_13141\orig-04421C-A020.bin

MD5 hash:  c06824efcf0ca07dc785a5eb73455258

Inquiry string found

Identify string found

Drive key @ 0xA020 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PBDS    VAD6038         0442]

Firmware is:  Stock                           

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target





Getting Status from port 0x0000

SPi flash found with Status 0x73



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !

Do not spoof drives, it won't work.
If nand reports 16d2s then 16d2s is the drive for this xbox.
Why are you flashing it with lt+1.1
Use ofw 02510c. It must work.

 

[x360ccm]

orig-04421C-A020.bin is for benq drives.

load your dummy into source.
load the orig-02510C-1c000 into target
click spoof source to target,make sure your key is the same as source.

then write to drive,outro job done

then download dash version 13146 pop that onto a usb pen drive,it should finish the update for you

fifa11 is a wave 6 game.so that shouldnt update to 13146.

wave 12 games update to the 13146 dash.

 

[ARUNCREATIONS]

Try 2.0.13599 dashboard update...

http://download.digiex.net/Consoles/Xbox360/Dashboards/2.0.13599.0.zip
and also flush your system cache by hold sync button & press power button

 

[LEENO]

i flashed orig-02510C-1c000 and tryes tips with synk button with no luck

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.92 Beta (304)

Session Started Mon Mar 05 18:45:38 2012



This is a 32 bit process running on 2 x 32 bit CPUs 

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed 

portio32.sys Driver Started, thanks Schtrom ! 

Found 7 I/O Ports.

Found 2 Com Ports.

Found 7 windows drives C: D: E: F: G: L: T:

Found 1 CD/DVD drives F:



Loading firmware file L:\CEL\XBOX 360\LITEON 251 0272\JungleFlasher\Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin

MD5 hash:  e7e0f802769fd80329784ca4b512f1a9

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS    DG-16D2S        0251]

Firmware is:  Stock                           

DVD Key copied to target

ID strings already match

Target rev is LT 02510C, serial info not copied



Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x90

....................

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name:  MXIC(MX25L2005)

Flash Size:  262144 bytes



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !

 

[x360ccm]

what dash was you on before you started to update.

 

[LEENO]

i not know but error code report 12625

 

[x360ccm]

well try to get these dash updates and try them.remember to put you drive to stock using the orig-74850C-1a000.
9199
12611
12625