GENERAL error 3151 - 335a - b800 - 0403 - c000 - 0058

L

LEENO

Full Member
Dec 2, 2009
52
0
ITALY
dgenx said:
well try to get these dash updates and try them.remember to put you drive to stock using the orig-74850C-1a000.
9199
12611
12625
Click to expand...
flashed 74850 and tryed to update dash
9199
12611
12625

with no luck

Code: 
JungleFlasher 0.1.92 Beta (304)

Session Started Mon Mar 05 19:25:30 2012



This is a 32 bit process running on 2 x 32 bit CPUs 

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed 

portio32.sys Driver Started, thanks Schtrom ! 

Found 7 I/O Ports.

Found 3 Com Ports.

Found 7 windows drives C: D: E: F: G: L: T:

Found 1 CD/DVD drives F:



Loading firmware file D:\BACK\Desktop\DL FAT\Dummy.bin

MD5 hash:  b0730fc15172776c196fd19c3844754a

Inquiry string found

Identify string found

Drive key @ 0xA030 D2C18BFD5335032278E32C1577275E92

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  PhatKey Extract                 

Loading firmware file L:\CEL\XBOX 360\LITEON 251 0272\JungleFlasher\Stock firmware\LiteOn (Phat)\LiteOn_Pre_13141\orig-74850C-1a000.bin

MD5 hash:  e4a34604fff9e7a642115a7287d47348

Drive key @ n/a 77777777777777777777777777777777

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  Stock                           

Spoofing Target

DVD Key copied to target

Inquiry string copied to Target

Identify string copied to Target

Serial data copied from Source to Target





Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x90

....................

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name:  MXIC(MX25L2005)

Flash Size:  262144 bytes



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !
 
A

ARUNCREATIONS

VIP Member
Oct 1, 2010
195
23
INCREDIBLE INDIA
www.facebook.com
Try this...

Clear Any Failed system updates that cause the console to error.

1. With the console off, press and hold the sync up button (the small one which you connect the pad with)
2. While holding the sync button press the power button to turn on the console
3. Continue to hold the sync button until the Console has booted up completely.
4. During the boot process the console should clear any failed updates, allowing you to use it normally.
Thanks to El Nino = http://www.xecuter.com/forums/showthread.php?t=69909

UPDATE WITH 13599 it will solve ur problem
 
L

LEENO

Full Member
Dec 2, 2009
52
0
ITALY
ARUNCREATIONS said:
Try this...

Clear Any Failed system updates that cause the console to error.

1. With the console off, press and hold the sync up button (the small one which you connect the pad with)
2. While holding the sync button press the power button to turn on the console
3. Continue to hold the sync button until the Console has booted up completely.
4. During the boot process the console should clear any failed updates, allowing you to use it normally.
Thanks to El Nino = http://www.xecuter.com/forums/showthread.php?t=69909

UPDATE WITH 13599 it will solve ur problem
Click to expand...
i tryed it before with no luck :(
 
Kevin26

Kevin26

Senior Member
Nov 8, 2011
118
0
Lets see you had LT3.0 before attempting to update because you were using a fifa11 backup to update to 13146. You also said that you read the nand and it says your mobo has the original drive of a liteon DG-16d2s. You also had the liteon DG-16D2S installed when attempting the update then stick with that one don't try any other drives as its the one you tried the update with and your mobo has the original drive of a DG-16D2S. Stick with the Liteon DG-16D2S as its the original and one you used to update to 13146 as dgenx said. Try this

Clear Any Failed system updates that cause the console to error.
-With the console off, press and hold the sync up button (the small white one)
-While holding the sync button press the power button to turn on the console
-Continue to hold the sync button until the Console has booted up completely.
-During the boot process the console should clear any failed updates, allowing you to use it normally.

Then check which dash version you have if your dash version is pre 13141 then flash drive to corresponding stock firmware, if your dash version is post 13141 then flash to stock firmware 02510C, after doing that then update the dash with pen drive formatted to FAT32 or cd/dvd!!!!! And if that doesn't work then clear the system update again, then flash the drive to LT3.0 and try the update again...

Edit: What aruncreations said...
 
Last edited:
L

LEENO

Full Member
Dec 2, 2009
52
0
ITALY
Kevin26 said:
Lets see you had LT3.0 before attempting to update because you were using a fifa11 backup to update to 13146. You also said that you read the nand and it says your mobo has the original drive of a liteon DG-16d2s. You also had the liteon DG-16D2S installed when attempting the update then stick with that one don't try any other drives as its the one you tried the update with and your mobo has the original drive of a DG-16D2S. You are just creating problems by using other drives. Stick with the Liteon DG-16D2S as its the original and one you used to update to 13146 as dgenx said. Try this

Clear Any Failed system updates that cause the console to error.
-With the console off, press and hold the sync up button (the small white one)
-While holding the sync button press the power button to turn on the console
-Continue to hold the sync button until the Console has booted up completely.
-During the boot process the console should clear any failed updates, allowing you to use it normally.

Then check which dash version you have if your dash version is pre 13141 then flash drive to corresponding stock firmware, if your dash version is post 13141 then flash to stock firmware 02510C, after doing that then update the dash with pen drive formatted to FAT32 or cd/dvd!!!!!

Edit: What aruncreations said...
Click to expand...
Thankyou bro,
but i already tryed those steps,
i can't check dash version because at startup it freeze on error code, i can only shutdown, anyway, according to error code 3151-335a, previous version was 12625.

I tryed with previous stock firmware and post firmware,
tryed synck button at startup and tryed to update to dash
9199
12611
12625
13146
13599

---------- Post added at 20:05 ---------- Previous post was at 20:04 ----------
ARUNCREATIONS said:
Whats your console model ?
Latest dashboard updates need free space more than 100 mb..
do u have connected your hdd ?
Click to expand...
falcon, hard disk isn't connected.
Now i connect hard disk from another xbox, wich dvdfirmware and wich dash is working?
 
R

robuklen

Senior Member
Jan 11, 2010
125
0
los angeles
if your console is an NON hDMI stick in an stock HITACHI or SAMSUNG drive then finish the update shoild work fine.. 100% for me .. but you might have to use 13146 or 13599 dash update
 
Kevin26

Kevin26

Senior Member
Nov 8, 2011
118
0
this update error in decimal form is saying you were updating from 12625 to 13146 so other dash versions won't work
 
axee44

axee44

VIP Member
Nov 8, 2011
330
48
York,UK
As this is well weird now and nothing reasonable seems to work, what i'd try is:
flash drive with lt+3.0(LTPlus-0251-v3.0.bin)
Put backup of fifa11 in the drive and see if it finishes updating.
 
L

LEENO

Full Member
Dec 2, 2009
52
0
ITALY
axee44 said:
As this is well weird now and nothing reasonable seems to work, what i'd try is:
flash drive with lt+3.0(LTPlus-0251-v3.0.bin)
Put backup of fifa11 in the drive and see if it finishes updating.
Click to expand...
this tryed before with no luck :(

i will install coolrunner for fix it :(
 
axee44

axee44

VIP Member
Nov 8, 2011
330
48
York,UK
Care to try flashing lt+3.0 again but with posting jf log this time??
Also if you have cpu key already, you don't need to install coolrunner.
 
Last edited:
  • Like
Reactions: LEENO
L

LEENO

Full Member
Dec 2, 2009
52
0
ITALY
dgenx said:
you must be doing something wrong then.coz it should of worked.
Click to expand...
I tyed prefirmware, postfirmware, lt3. 0 and tryed to update almost all dash versions.

There is any way to edit nanddump for make it working?

---------- Post added at 20:42 ---------- Previous post was at 20:40 ----------
axee44 said:
Care to try flashing lt+3.0 again but with posting jf log this time??
Also if you have cpu key already, you don't need to install coolrunner.
Click to expand...
I have cpukey, please can you explain how make it working without coolrunner?

---------- Post added at 20:52 ---------- Previous post was at 20:42 ----------
axee44 said:
Care to try flashing lt+3.0 again but with posting jf log this time??
Also if you have cpu key already, you don't need to install coolrunner.
Click to expand...
here is lt3.0 log

Code: 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.92 Beta (304)

Session Started Mon Mar 05 20:44:56 2012



This is a 32 bit process running on 2 x 32 bit CPUs 

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed 

portio32.sys Driver Started, thanks Schtrom ! 

Found 7 I/O Ports.

Found 2 Com Ports.

Found 7 windows drives C: D: E: F: G: J: L:

Found 1 CD/DVD drives F:



XECUTER X360USB PRO removed.



XECUTER X360USB PRO attached.



Loading firmware file D:\BACK\Desktop\DL FAT\Dummy.bin

MD5 hash:  b0730fc15172776c196fd19c3844754a

Inquiry string found

Identify string found

Drive key @ 0xA030 D2C18BFD5335032278E32C1577275E92

Firmware Osig: [PLDS    DG-16D2S        7485]

Firmware is:  PhatKey Extract                 

Loading firmware file L:\CEL\XBOX 360\JUNGLE\JungleFlasher\firmware\LITEON_PHAT\LTPlus-0251-v3.0.bin

MD5 hash:  d14fe82b96741b7a18e5c1e7adbf0a98

Genuine LT plus v3.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS    DG-16D2S        0251]

Firmware is:  LT-Plus 3.0                     

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target



Target rev is LT 02510C, serial info not copied



Sending Lite-On-Erase request to port 0x0000

..............

Drive returned Status 0x0

.....

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name:  MXIC(MX25L2005)

Flash Size:  262144 bytes



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !
 
Last edited:
axee44

axee44

VIP Member
Nov 8, 2011
330
48
York,UK
If you have cpu key and 2 dumps of working nand you can use j-runner to create retail image(but lowest in j-runner is 14699 i think - so you would update to 14699 staright away)
But i think we are missing something very simple here cos your xbox should finish updating with usb drive without a problem. Personally i would start from scratch:
1.format usb drive to fat32
2.copy ms update 13146 to it (only one folder $systemupdate) nothing else on usb drive.
3.plug usb drive into xbox and power on
do steps 1,2,3 with dvd drive flashed with lt+3.0(orig-02510C-1c000 from post 13146 folder) and if this doesn't work flash drive to lt+3.0(LTPlus-0251-v3.0.bin)
This should work.
Creating nand image and flashing it to your xbox is kind of reinventing the wheel and you can run int LDV issues.
 
  • Like
Reactions: LEENO
You must log in or register to reply here.