Error 9

[crazyrpger]

Hey,
I installed the X3 fine, it worked. New hd, it worked. Now, I hit the cd drive, took the xbox apart and fixed it. I keep getting erro 9. What's up?

 

[crazyrpger]

Okay,
Update, sometimes it does this, sometimes no. I don't get it.

 

[crazyrpger]

Another update: I cannot run anything! PLEASE HELP ME!!!

 

[crazyrpger]

Yet another update, I took out the IDE cable and reinserted it and now things work, but I'm afraid this will happen again. WHy did this happen?

 

[thematrix24]

x-clamp error code 0102

i did the x-clamp didnt work i reflow it with heat gun them put the x-clamp didnt work..any other way to fix this help?

 

[Skiloo123]

Re: x-clamp error code 0102

well you probably didn't get the gpu chip hot enough with the heat gun.

but if you get it too hot you will damage the chip.

 

[strucdown]

Re: x-clamp error code 0102

try different amounts of washers on the bolts has this can effect it i followed the xclamp fix on llama.com but after the fix it was still flashing lights so i removed 1 washer from each screw on top of the mobo and tried again
this time green lights and and has been running flawlessly since

 

[Made]

Re: x-clamp error code 0102

ive had great success with the xecuter rrod kit. even stubborn boxes have come back with this and the extra heatsinks have helped with the overheating loads.

 

[houston]

Re: x-clamp error code 0102

Try losing the spring washers... and using very little paste... Just a rice grain on the CPU(LEFT) and a little more for the GPU

and dont tighten too much!

 

[thematrix24]

Re: x-clamp error code 0102

i dont know if i im using the right heat gun but i have a heat gun it say exceeds 400f or maybe i mdoing the x-clamp fix wrong i dont know and if it the ram chips how could i fix this help please i would like t obring my xbox360 back to life