I recieved my X3 today so I was wokring on installing it. After the first I was getting some Fragging everytime I boot to the mod chip. But, it would bypass the X3 and boot normal with out any issues. After fighting for a while and re-soldering everything several time, it tunred it that the problem was the DO lead was incorrect. Preoblem solved...? Not likley. I also purchased a XLCD. So I modified the case and installed the LCD. While everything was in pieces the xbox would boot to the X3, now with the latest X3 1959 bios. So I now thought that the job was all done and put everything back together. I figured I would turn it on one last time now that is was all zipped up and ready for playing, when disaster struck.
I tried to bypass tge X3 only to get the Error code 05. I know that this means that the HDD is not locked, but the questions is why? Then I tried tried to boot to the X3, and that is when it started fragging again! I thought that maybe when I had screwed the case back to gether it pulled a wire or solder loose, or maybe sometihing else got disconnected. After opening it up, I found that everything looked great. The DO lease was soldered perfect. as were all the connections. I have NO clue where to start troubleshooting this one.
Any ideas as to what happened, and how to fix it?
I tried to bypass tge X3 only to get the Error code 05. I know that this means that the HDD is not locked, but the questions is why? Then I tried tried to boot to the X3, and that is when it started fragging again! I thought that maybe when I had screwed the case back to gether it pulled a wire or solder loose, or maybe sometihing else got disconnected. After opening it up, I found that everything looked great. The DO lease was soldered perfect. as were all the connections. I have NO clue where to start troubleshooting this one.
Any ideas as to what happened, and how to fix it?
