Hi al was trying flash liton 74850c got key then went to erase and that were it went wrong is there eny fix for this drive thanks .
Error e 65
- Thread starter besty
- Start date
rdubbs007
VIP Member
I think I save it the dummy key is it called .
---------- Post added at 06:51 ---------- Previous post was at 06:51 ----------
Can not get it to eject now to do try half open .
---------- Post added at 06:51 ---------- Previous post was at 06:51 ----------
Can not get it to eject now to do try half open .
rdubbs007
VIP Member
Teajunkie
VIP Member
Only If you have the key in the dummy.bin
power on drive and click liteon erase,
Does the status change then?
power on drive and click liteon erase,
Does the status change then?
Teajunkie
VIP Member
Teajunkie
VIP Member
Could be dead 
You havent reversed powered it?
If you used a probe 3 did the probe touch any other points?
You havent reversed powered it?
If you used a probe 3 did the probe touch any other points?
Teajunkie
VIP Member
I got up to taking key out and saving it ,so can you only use another liteon drive in it or can use one others .
---------- Post added at 09:41 ---------- Previous post was at 09:39 ----------
Driver serail 0000: 44 36 30 38 43 47 38 33 - 33 39 30 37 30 31 30 46 D608CG833907010F
0010: 30 20 20 20 FF FF FF FF - 38 47 33 31 30 37 35 30 0 ....8G310750
0020: 31 37 45 34 31 34 58 58 - 41 30 FF FF 53 34 50 38 17E414XXA0..S4P8
0030: 38 31 34 30 30 30 30 30 - 31 31 34 34 34 33 00 00 81400000114443..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..
---------- Post added at 09:41 ---------- Previous post was at 09:39 ----------
Driver serail 0000: 44 36 30 38 43 47 38 33 - 33 39 30 37 30 31 30 46 D608CG833907010F
0010: 30 20 20 20 FF FF FF FF - 38 47 33 31 30 37 35 30 0 ....8G310750
0020: 31 37 45 34 31 34 58 58 - 41 30 FF FF 53 34 50 38 17E414XXA0..S4P8
0030: 38 31 34 30 30 30 30 30 - 31 31 34 34 34 33 00 00 81400000114443..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..
What are you on? :facepalm:
Im sure this is an xecuter forum. anyway back to the topic, providing you have your dummie.bin saved the you can re-flash a liteon16d2s, doesnt matter if its a 7,8 or 9 series drive, but you cannot use any other make/type of drive.
Last edited:
I not got Lizard how will that help before i order one thanks .
---------- Post added at 18:32 ---------- Previous post was at 18:31 ----------
I got the dummie.bin saved and I tryed what lads have to do but still getting ox80 status.
---------- Post added at 18:32 ---------- Previous post was at 18:31 ----------
I got the dummie.bin saved and I tryed what lads have to do but still getting ox80 status.
Youve already got the best bit of kit on the market with the x360usbpro, ignore canyous comment on the lizard it isnt going to solve anything, anyway, if youve got your key saved then like ive said before you can flash any liteon 16d2s drive.
Fisticuffs
VIP Member