Error reading some blocks (r-jtag)

[hersheys247]

can you tell me what settings to test 1 and 3 on?

Red probe on point testing, the black to ground... Rinse and repeat for other points. Also check continuity between points they might have bridged.

 

[xWeasel]

Red probe on point testing, the black to ground... Rinse and repeat for other points. Also check continuity between points they might have bridged.

ok heres how my multimeter looks like: http://oi59.tinypic.com/289d2sy.jpg
what settings should i put it on to check 1, 3, 2?

 

[Martin C]

That setting is fine for voltage (DCV - DC Voltage) - the maximum you're reading is 3v3.

 

[xWeasel]

That setting is fine for voltage (DCV - DC Voltage) - the maximum you're reading is 3v3.

1. 1.965V
2. 1.832V
3. 1.672V

 

[Martin C]

2 should be closer to 3v3 so I'd recheck all soldering.

 

[xWeasel]

2 should be closer to 3v3 so I'd recheck all soldering.

ok ill do it on saturday, thanks for the help, also are 1 and 3 okay? or shall i re-solder them as well?

 

[Martin C]

If one's dodgy, no harm in checking all of them.

 

[xWeasel]

If one's dodgy, no harm in checking all of them.

alright, thanks for the help again