Error when updating to 17150 Dash with J-Runner

[rghabc]

I'm in 14699 dashboard and wanted to updato to the latest 1750, started the update proccess with J-Runner (I have FSD 775 and Dashlaunch 3.14 (571), this is what I did, enabled updserv in DL, in Jrunner loaded in Source my nanddump, previously I went to Advanced>Get latest System Update, went to Patches/Dashlaunch tab and checked "Use Dashlaunch" and "Include Launch .ini ?", then in Update Mode tab it says 1750, I clicked Update, and the log says this:





WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Select Load Nand to open the folder: C:\Users\Pedro Miguel\Desktop\my jasper\J-Runner v3 (5) Core Pack\417942194105
Initializing nanddump1.bin..
Jasper BB
Glitch Selected
Nand Initialization Finished
Finished Checking Files
Load Files Initiliazation Finished
17150
Started Updating Console to 17150
---------------------------------------------------------------
xeBuild v1.14.693
---------------------------------------------------------------
base path changed to C:\Users\Pedro Miguel\Desktop\my jasper\J-Runner v3 (5) Core Pack\xeBuild
---- { Update Mode } ----
***** WARNING: reusing folder C:\Users\Pedro Miguel\Desktop\my jasper\J-Runner v3 (5) Core Pack\output\!
started, watching network for xbox...success, found xbox beacon at 192.168.1.101
connected to Jasper with updsvr version 3 (peek version 0)


*****ERROR: console hv patches are not recent enough to support update mode!


update console patches and reboot before trying again.




***** FATAL UPDATE ERROR: unable to parse info reply from console!


---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Failed


What can I do?

 

[nofeloniesyet]

I'm in 14699 dashboard and wanted to updato to the latest 1750, started the update proccess with J-Runner (I have FSD 775 and Dashlaunch 3.14 (571), this is what I did, enabled updserv in DL, in Jrunner loaded in Source my nanddump, previously I went to Advanced>Get latest System Update, went to Patches/Dashlaunch tab and checked "Use Dashlaunch" and "Include Launch .ini ?", then in Update Mode tab it says 1750, I clicked Update, and the log says this:





WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Select Load Nand to open the folder: C:\Users\Pedro Miguel\Desktop\my jasper\J-Runner v3 (5) Core Pack\417942194105
Initializing nanddump1.bin..
Jasper BB
Glitch Selected
Nand Initialization Finished
Finished Checking Files
Load Files Initiliazation Finished
17150
Started Updating Console to 17150
---------------------------------------------------------------
xeBuild v1.14.693
---------------------------------------------------------------
base path changed to C:\Users\Pedro Miguel\Desktop\my jasper\J-Runner v3 (5) Core Pack\xeBuild
---- { Update Mode } ----
***** WARNING: reusing folder C:\Users\Pedro Miguel\Desktop\my jasper\J-Runner v3 (5) Core Pack\output\!
started, watching network for xbox...success, found xbox beacon at 192.168.1.101
connected to Jasper with updsvr version 3 (peek version 0)


*****ERROR: console hv patches are not recent enough to support update mode!


update console patches and reboot before trying again.




***** FATAL UPDATE ERROR: unable to parse info reply from console!


---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Failed


What can I do?

no need for 2 sep threads man,thats a good way to get a temp ban.

the console itself is already running 3.14 patches or ur jujst running 3.14 to enable updserv? if dl asks if u want to update patches tell it yes and redo everything you just did.

 

[rghabc]

no need for 2 sep threads man,thats a good way to get a temp ban.

the console itself is already running 3.14 patches or ur jujst running 3.14 to enable updserv? if dl asks if u want to update patches tell it yes and redo everything you just did.

I'm sorry I didn't know if anybody was going to see my old thread. I won't do it again, I don't know, I don't recall dashlaunch asking me to update patches.

How can I make sure if the console is running with those patches?

 

[nofeloniesyet]

I'm sorry I didn't know if anybody was going to see my old thread. I won't do it again, I don't know, I don't recall dashlaunch asking me to update patches.

How can I make sure if the console is running with those patches?

if when you run dl its not asking you to update the patches,its running on latest already.

do you have your orig nand handy?

 

[rghabc]

if when you run dl its not asking you to update the patches,its running on latest already.

do you have your orig nand handy?

Yes, I do. I have 4 dumps jrunner gave me of aproximately 66 megabytes each

 

[nofeloniesyet]

Yes, I do. I have 4 dumps jrunner gave me of aproximately 66 megabytes each

get flash360 put it on usb,and use orig nands to build a 17150 rgh1 img and make sure to enable dl patches.put updflash on usb with flash360.then put in xbox,run flash360 from xexmenu and flash the newly built nand that way.

 

[rghabc]

In miscellaneous, the Update Patches function is greyed out, I just tried another method on a tutorial which was opening a command prompt on the xebuild folder and typing: xebuild update -f 17150

And the same thing about hv patches appear in the command prompt.

 

[rghabc]

Ok, I'll try that right now

 

[rghabc]

get flash360 put it on usb,and use orig nands to build a 17150 rgh1 img and make sure to enable dl patches.put updflash on usb with flash360.then put in xbox,run flash360 from xexmenu and flash the newly built nand that way.

It worked!!!, thank you nofelonies, I took a while because I backed up the full nand with Flash360. I'm on 17150, I just have to get the avatars

 

[nofeloniesyet]

It worked!!!, thank you nofelonies, I took a while because I backed up the full nand with Flash360. I'm on 17150, I just have to get the avatars

you remember how to do that? if not just post back in this thread.

 

[rghabc]

you remember how to do that? if not just post back in this thread.

Actually I never did it, was afraid it would brick my xbox, but some games failed and forums said it was because of that, and I think I'm having some video player trouble because of that.

What I was going to do right now was put in a usb stick the $Systemupdate folder (which I got from the Jrunner folder when I click Advanced>Get latest System Update), and according to a video it would prompt an update which is "safe" to install and that's it.

Is that the proper procedure?

Thanks again for the live help

 

[nofeloniesyet]

Actually I never did it, was afraid it would brick my xbox, but some games failed and forums said it was because of that, and I think I'm having some video player trouble because of that.

What I was going to do right now was put in a usb stick the $Systemupdate folder (which I got from the Jrunner folder when I click Advanced>Get latest System Update), and according to a video it would prompt an update which is "safe" to install and that's it.

Is that the proper procedure?

Thanks again for the live help

put the update on usb,rename it to $$ystemUpdate,if you have f3 dash installed,you need to back out of that before sticking the usb stick into xbox.to do this you hit the home button on controller,then go all way to right to system settings,and hit that,this will take you back to the metro (retail looking) dash,then insert usb stick,it should then prompt for update,just accept.

 

[rghabc]

put the update on usb,rename it to $$ystemUpdate,if you have f3 dash installed,you need to back out of that before sticking the usb stick into xbox.to do this you hit the home button on controller,then go all way to right to system settings,and hit that,this will take you back to the metro (retail looking) dash,then insert usb stick,it should then prompt for update,just accept.

That's it, I have the avatar update installed, it did solved my problem when streaming videos from my PC, I used to get the 69-C00DF804 error code. Now it just plays fine, now I'll try COD Black Ops 2 which used to freeze on Multiplayer.


Thank you so much nofelonies, I really appreciate your help.