External HDD

[Suggy47]

Ok guys, best start from the beginning:frown:

1st I fitted CR4 and loaded everything to the internal HDD (xex, dashlaunch, FSD and my games) and everthing worked perfect.
2nd I then fitted a Demon which also worked perfectly.

Now I have removed the internal HDD and using it as an external HDD and fitted a new internal HDD.
I want to boot from the internal HDD with retail nand (easy pessy) and boot to the external HDD when booting from the Demon, this is where I am stuck.
How do I get it to boot into FSD which is on the external HDD without putting anything on the internal HDD

Hope this make sence

Thanks in advanced for any input

 

[gavin_darkglide]

put your launch.ini on the usb, it will skip the hdd, but the xbox will still see it, and save stuff to your profile. I think the latest xebuild has a patch to disable hdds with a SS flashed to them, which would solve the problem.

 

[Suggy47]

Wont the launch.ini already be on the Hdd seen as it was internal to start with?

Forgot to mention. The HDD was hacked to be an original MS HDD and formatted to be a standed 360 HDD

Just want it to work like it was when it was internal but now external

 

[[email protected]]

you would have to change the ini to be read from usb still as the hard drive is no longer internal and not read as hdd but a usb device

 

[gavin_darkglide]

As a usb drive, it needs to be formatted to fat32. then you can use the xbox to create a 32gb MU section, and can put your games on the drive, with launch.ini, and aurora/fsd/xexmenu and you should be good to go.