hey i got the mod chip v.3 the newst one and the blue light shows up when i turn it on so i know its working but the external switch is not working because the light is not working and i cant go into the flash bios mode so i cant go any further
external switch
- Thread starter NeoDragon7
- Start date
You say the blue light works, but the external switch doesn't. Are you saying blue light on the chip itself? Or on the external switch that you say doesn't work. If you mean on the chip itself, there should be two blue lights, one for 3.3v, and one for 5v. Are both of those lit up?
if the lights on the chip isn't working, look at the pins. they can get easily bent.
i had the same prob with my pro switch. after figuring out it asn't the cable. i looked a the pins.
it might also be pins 9 & 15(3.3v) . to check 2 blue leds should be on on the x3 chip
i had the same prob with my pro switch. after figuring out it asn't the cable. i looked a the pins.
it might also be pins 9 & 15(3.3v) . to check 2 blue leds should be on on the x3 chip
There are 2 blue LEDs on the X3 that should be on if everything is soldered on correctly.NeoDragon7 said:
nutsak
VIP Member
ok i dont understand this is my first time doing this so when u say pin 15 and 9 do i need to do something to them or just check that they are connected correctly because they are
If pins 9 and 15 were connected correctly you would have 2 led's on the chip. since you don't have 2 led's guess what....their not connected correctly. Try resoldering them or connecting them with a wire. also what version xbox do you have?NeoDragon7 said:
i tried it but its still not working only one light is lighting up i resolderd it and i used a wire but it still only had one of the led's light up whats the matter
nutsak
VIP Member
your problem plain and simple is your soldering isn't good enough. either pins 9 and 15 aren't getting a proper connection or your screwing up with the alt 5v