LITEON 74850 Extracted drive key failed verification

O

oscar193

Noob Account
Nov 5, 2011
5
0
I'm having a little trouble extracting my dvd key from my 74850C DG-16D2S phat liteon drive.

My current setup:
Windows XP x86
CK3 Probe 3
Using Xbox to power drive
VIA card

I've followed numerous tutorials exactly and still have yet to have 1 successful dump, I've tried with both my CK3 probe 3 and a homemade probe, neither worked.

Here is a picture of my JungleFlasher:


Any help would be greatly appreciated.
 
D

[Death]

VIP Member
Mar 8, 2005
153
23
South West UK
liteons are a pain in backside with sata, i couldnt get 1 i was doing to work at all, in the end i got a usb 360. perfect ever scince, try your on board sata see what happens
 
O

oscar193

Noob Account
Nov 5, 2011
5
0
bigO73 said:
check to make sure you're probing the right point, mpx101. I read something the other day where the guys was probing the hole next to it lol.
Click to expand...
I'm definitely probing the right one, I've checked numerous times.

[Death] said:
liteons are a pain in backside with sata, i couldnt get 1 i was doing to work at all, in the end i got a usb 360. perfect ever scince, try your on board sata see what happens
Click to expand...
I've tried my onboard Intel SATA ports, still nothing. I'd really rather not have to resort to spending £40 on a X360USB.
 
D

[Death]

VIP Member
Mar 8, 2005
153
23
South West UK
hmm u tried via with and without drivers? , but seriously though the x360 usb is best thing i have ever bought tbh
 
D

[Death]

VIP Member
Mar 8, 2005
153
23
South West UK
hmm not sure what else to suggest, liteons have always been tempermental. if u have tried every sata port, then i think u may need to find some 1 in ure area with usb m8, sorry, but double check u are pushing down firm on the point, that can be an issue too
 
D

[Death]

VIP Member
Mar 8, 2005
153
23
South West UK
ure using the button on lead to probe right, not actualy switching it on / off?
 
T

talby71

VIP Member
Nov 24, 2010
3,463
0
Near Melbourne , Australia
CK3 power on
on JF on DVDKey 32 tab
press Phatkey, press Yes
probe switch off (hold it in))
probe MPX01
probe switch on (release button)
extract complete pops up
remove probe
probe switch off (or ck3 power off)
power back on
press ok
all done


are you holding the switch in till you probe and then releasing it once on MPX01
 
D

dizzyd1986

Full Member
May 31, 2011
55
0
I've had this happen to me before. After several attempts I realised I wasn't running jf as administrator. When you start jf make sure you right click and run as administrator worked perfect first time.
 
X

xboxhack11

VIP Member
Nov 6, 2011
197
0
Are you probing the right hole. I have one of these drives. I thought the R707 hole was the right one with the tray half open.
 
M

maddogs

Noob Account
Aug 5, 2011
2
0
I have done this with a intel p55 sata what OS are you using and do you have in AHCI mode. I found it works best in xp 32 non AHCI.
 
G

gilsport

Full Member
Nov 2, 2011
80
0
i have the same problem as him.
and just like him i do probe the right point.
i also do not use the probe3 button just use the ck3 on/off switch....
 
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
The Probe 3 button works fine if used correctly.

When it asks you to power cycle, hold the switch down (LED off), count to three, release the switch (LED back on) then click OK.
 
G

gilsport

Full Member
Nov 2, 2011
80
0
blakey8 said:
The Probe 3 button works fine if used correctly.

When it asks you to power cycle, hold the switch down (LED off), count to three, release the switch (LED back on) then click OK.
Click to expand...
yeah i think we both know the drill but it does not work.
:confused:
maybe the probe 3 is damaged?
 
You must log in or register to reply here.