Failed on First SX Pro booting (System 6.1)

[keinchang]

Hi all,

Yesterday I just received my SX pro and attempted to install it in my NS machine but failed on Booting.

Theses are the steps I did

My system in NS is ver 6.1

1. Format the SD (32GB sandisk )card by NS.
2. Copy boot.dat (SXOS_v2.0.1) into root of SD card.
3. Insert SD card in power off NS.
4. Insert JIG in right rail and Dongle at USB-C port (The dongle shall be fully charged)
5. Hold Vol + button and Press "Power" to on NS

But No response on NS, black screen and No SX bootloader menu, even No light at Dongle and can not check if into RCM mode.

I have tried the process several times event initialize the NS to default setting, but still failed.

Can anyone kindly to solve my problem?

 

[Hackerjac]

You could start with telling us the serial of your console, so we can make sure its abel to load the payload

 

[keinchang]

You could start with telling us the serial of your console, so we can make sure its abel to load the payload

XAJ10031889215
Does it work with SX pro?

 

[Hackerjac]

Take a read here
https://team-xecuter.com/forums/thr...-Switch-is-currently-unhackable-(August-2018)

There is also mentioned a solution to how to check if your console is patched or not

 

[Bloodlust]

Actually, a bit of common sense will dictate that if the console came with 6.1 firmware it should be the newest batch and will not work with SX OS for now

 

[Velvet]

XAJ10031889215
Does it work with SX pro?

If your console is not able to be modded yet, best you can is wait.