ANSWERED (Failed to find fcrt.bin)When trying to create retail nand for LTU2

[juanguib360]

Hi, I have a RGH(Corona V1 250HDD) that need to go back to retail nand and install LTU2, i DO NOT have original nand dump cause i didnt RGHd in the first place, so i got nand dump (and cpu key,LDV and CB from xell)and it matches...but when Extracting Files, it gives me this error(Failed to find fcrt.bin) so i can not build LTU2 without (key.bin and CR.bin)......I also noticed that the problem could be caused by a bad nand flash from the guy who did it before, cause the nand dump shows in Jrunner as if it was a Trinity console, but it is not, 100% sure it is a Corona V1,....so i built a RGH2 17150 image with NO FCRT enabled on J Runner V 0.3 Beta7 and flashed it to the nand and it boots fine but the DVD Drive does not read originals discs.....so my question is: Is there a way to get or build those missing files for this box??(fcrt.bin,key.bin and CR.bin)


Thanks in advance.




Here is my Log:


==============================================
=====
lunes, 16 de febrero de 2015 06:29:26 p.m.
J-Runner v0.3 Beta (7) Started

Checking Files
Finished Checking Files
Version: 03
Flash Config: 0x00043000
00043000
Corona
CB Version: 9188
Trinity
Reading Nand to C:\J-Runner v3 (5) Core
Pack\output\nanddump1.bin
Reading Nand
Done!
in 2:08 min:sec
Reading Nand to C:\J-Runner v3 (5) Core
Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Reading Nand
Glitch2 Selected
Nand Initialization Finished
Done!
in 2:08 min:sec
Comparing...
Nands are the same
Finished Checking Files
Initializing nanddump1.bin..
CpuKey is Correct
Added Key to Database
Extracting..
Saving SMC_en.bin
Saving SMC_dec.bin
Saving KV_en.bin
Saving KV_dec.bin
Saving smc_config.bin
Working...
Failed to find fcrt.bin
Trinity
Glitch2 Selected
Nand Initialization Finished
Moving All files from output folder to C:\J-Runner v3 (5) Core
Pack\400379520405
Corona Manually Selected
Glitch2 Selected
Initializing nanddump1.bin..
Trinity
Nand Initialization Finished
Corona Manually Selected
nofcrt Enabled
Load Files Initiliazation Finished
17150
Started Creation of the 17150 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.14.693
---------------------------------------------------------------
base path changed to C:\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building glitch2 image

***** ERROR: fcrt.bin not found, keyvault has this file flagged
as required but it's being skipped *****
note - on hacked images a nofcrt patch WILL NOT
allow the drive to function
but should allow the machine to boot normally
---------------------------------------------------------------
C:\J-Runner v3 (5) Core Pack\400379520405\updflash.bin
image built, info:
---------------------------------------------------------------
Kernel : 2.0.17150.0
Console : Corona
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 400379520405
ConsoleId : 605249892050
MoboSerial: 790964D223972015
Mfg Date : 01/25/2012
CPU Key : 2B923ACDA2C9BCA005F789D31FC2787C
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : C9C742EB2168757832B6A55C6F0BF187
CF LDV : 1
KV type : type2 (hashed - unchecked, master key not
available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\J-Runner v3 (5) Core Pack\400379520405
Image is Ready
Initializing updflash.bin..
Corona
Nand Initialization Finished
Version: 03
Flash Config: 0x00043000
Writing Nand
updflash.bin
Done!
in 1:59 min:sec

 

[juanguib360]

I forgot to point out that this box has a Liteon 16D5S fw 1175 DVD Drive, so I can not build a cfw on JF without those missing files....Thanks.

 

[gavin_darkglide]

Does the KV info say that the fcrt is required? Also did the drive work before you created an image with the FCRT patch?

 

[juanguib360]

Yes and No.....I mean Yes when trying to create the retail nand (as Martin C`sguide) it needs the fcrt.bin.......and No the drive didnt work before..the box didnt even booted when i got it.

 

[jsinger47]

Yes and No.....I mean Yes when trying to create the retail nand (as Martin C`sguide) it needs the fcrt.bin.......and No the drive didnt work before..the box didnt even booted when i got it.

Then there is absolutely no way to return to stock without an original dump.

 

[juanguib360]

Then there is absolutely no way to return to stock without an original dump.

Ohhh ...I see...That is what I was afraid it would be...Ok, so I will have to leave as RGH and only reading backups on FreeStyle Dash from default.xex.

Thanks for your time and help.