FIXED falcon 15574 with RJTAG fail to boot into xcell

H

heroheroine

Junior Member
Jul 4, 2013
11
0
Console Type: Falcon
NAND size: 16
Dashboard version: 2.0.15574
CB version: 5774
Screenshot of NAND details from J-Runner:

J-Runner log:
Thursday, 15 August 2013 5:19:43 PM

J-Runner v0.2 Beta (289) Started



Checking Files
Initializing nanddump1.bin..
Nand Initialization Finished
Finished Checking Files
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully falcon_hack_aud_clamp.bin
Version: 10
Flash Config: 0x01198010
Writing Nand
falcon_hack_aud_clamp.bin
Done!
in 0:18 min:sec
POST output from J-Runner (either POST_OUT monitor or RATER output):
Version: 10
Power Up
Waiting for POST to change
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 24 - VERIFY_OFFSET_3BL_CC
Post 04
Post 19 - HMACSHA_COMPUTE
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Most Fails(cumulative): 0xA0
Shutdown

updflash.bin log (if applicable):n/a
Image of R-JTAG board:
Images of close-up soldering to motherboard:

IMG_1816.JPGIMG_1819.JPGIMG_1820.JPGIMG_1821.JPGIMG_1822.JPGIMG_1823.JPGIMG_1824.JPGIMG_1825.JPG
Description of problem:
unable to boot into xcell
Was the console working before you started: Y
 

Attachments

H

heroheroine

Junior Member
Jul 4, 2013
11
0
it was able to boot!!!

rater log:
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 48 - SHA_COMPUTE
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 2E - HWINIT
Post 31 - FETCH_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post 3A - BRANCH
Post 40 - Entrypoint of CD reached
Post 42 - FETCH_HEADER
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 46 - RC4_INITIALIZE
Post 47 - RC4_DECRYPT
Post 48 - SHA_COMPUTE
Post 4B - LZX_EXPAND
Post 4E - FETCH_OFFSET_6BL_CF
Post 4F - VERIFY_OFFSET_6BL_CF
Post 50 - LOAD_UPDATE_1
Post 52 - BRANCH
Post 58 - INIT_HYPERVISOR
Post 5A - INIT_XEX_TRAINING
Post 61 - INIT_HAL_PHASE_0
Post 62 - INIT_PROCESS_OBJECTS
Post 63 - INIT_KERNEL_DEBUGGER
Post 64 - INIT_MEMORY_MANAGER
Post 65 - INIT_STACKS
Post 66 - INIT_OBJECT_SYSTEM
Post 67 - INIT_PHASE1_THREAD
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS
Post 69 - INIT_KEY_VAULT
Post 6A - INIT_HAL_PHASE_1
Post 6B - INIT_SFC_DRIVER
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Most Fails(cumulative): 0xA0
Shutdown
Resetting................
 
H

heroheroine

Junior Member
Jul 4, 2013
11
0
please take to look of these two photos
IMG_1819.JPGIMG_1823.JPG

point FT6U7 at the back of the board was damaged, so I rewired FT6U7 near the CPU.Are you able to see the red and white wire?total length is 35cm.Do you think, it can cause slow to boot?

also I was on RGH2.0 flacon. I also have the feeling that the motherboard needs to warm up itself first(usually take few mins) in order to boot the xbox360.So for the RJTAG right now,I think its the same.
 
Last edited:
xzanox

xzanox

VIP Member
Nov 1, 2011
905
48
Netherlands, 1336
I don't have so much knowledge of that tbh, just wondering if you've tried all settings now? I had one falcon R-Jtagged which wouldn't boot at all or give rrod on anything else except dip 6 (and of course 7 standard for falcon) ON. With dip 6 on, aud_clamp, 470 jumper and no voltage adjusted, it boots consistently 1-2 cycles. Only didn't damage any points on that board so if the points aren't repaired correctly, i only can imagine it will cause problems...
 
H

heroheroine

Junior Member
Jul 4, 2013
11
0
yeah, i am doing the fine tune!looks quite good.score7-8. I done it!!!

I finally able to switch from RGH2 to RJTAG!!!
 
H

heroheroine

Junior Member
Jul 4, 2013
11
0
the first initiate boot from room temperature(it feels cold when I touch both heatsink) always unsuccessful till the machine warm up or i can say till 30-40 cycles of glitch,then goes smooth(3-5 glitches to each boot in the rater test).But as soon as the machine cool down(it feels cold when I touch both heatsink),it tooks 30-40 cycles glitch again for the first initiate boot, then goes smooth(3-5 glitches to each boot in the rater test).
 
H

heroheroine

Junior Member
Jul 4, 2013
11
0
Martin C said:
so it's more responsive when it's warm?
Click to expand...
yeah, I am not sure because I rewire the FT6U7 point near the CPU or not,please take a look this photo.IMG_1819.JPG

cycles glitch:
35
4, 3, 2, 2, 0,
0, 1, 0, 2, 2,
2, 1, 2, 1, 2,
8,
36
4, 1, 2, 2,

In the rater test,35 and 36 are first initiate boot from completely cool down from heatsink,while the machine still hot or warm in the 35th glitch,then I press "stop" button, then click "start" button straight away,then the boot time improved dramatically!

Till 35 and 36,I didn't turn on any fan at all,i just want to warm up the machine,then when it boot in the first time,then I turn the fan on to cool it down,but the cycle glitch timing won't drop,still kept 2-5 glitch to boot.
 
Last edited:
E

[email protected]

VIP Member
Jun 21, 2012
383
0
just the same thing with Zephyr, if I block the airflow from fan to CPU with a piece of paper it boots within 1..2 glitches every time, when the CPU is cold it takes forever to boot
 
You must log in or register to reply here.